ReadMe - Adriana County SW1

Adriana County Railroad serves a number of on-line elevators some of which are remote from other
industries. In order to minimise mainline crew switching time they came to arrangements with some of the
elevators to supply on long term loan switchers to be operated by elevator staff for purpose of
loading movements. These switchers are only allowed on the main to move on/off the loading tracks
(before or after ACR crews have dropped fresh empties in place) subject to dispatching.
The engine found most suitable is the SW1.

All of the above is fictitious none of the following is.

This repaint is based on the Reppo SW1 available on Steam:
https://store.steampowered.com/app/2956080/Train_Simulator_SW1_Switcher/
 
You must have this pack for the repaint to work.

Most of the work involved in this repaint is by Buzz456 and I am grateful to him as it made my
job easier (he had sorted out the map, saving me struggling to do the same!).
I used his MILW SW1 as a template, leaving black as black but painting orange/brown as Red and
applying the herald and name. I also did the numbers. I have used 9 as a blank so that the locos
have 2 digit numbers 10-18 & 20.
I am also grateful to jtousign as he sorted out the cabviews.

To install

Unzip the folder and then drop the folder "Assets" into your Railworks folder.
Open the folder in your assets:
Reppo\EMDSW1\RailVehicles\BO and copy the file: SW1_BO.GEOPCDX.
Open the folder:
Reppo\EMDSW1\RailVehicles\ACR and drop the above .GEOPCDX in.

You must have the Reppo\EMDSW1 checked in the top RH flyout and the engines appear
in the LH assets flyout as:
EMD SW1 Switcher ACR C&D
EMD SW1 Switcher ACR ND C&D
EMD SW1 Switcher ACR Running
EMD SW1 Switcher ACR ND Running

Mindenjohn
RWA member
Feb 16, 2025