Pogwassek Island Railway - Rolling stock Assets Pack

PIR - GE44 tonner clean and dirty, HH660 Clean and dirty, Caboose clean and dirty.

These repaints are freeware based on Payware and Freeware as detailed below. The repaints can be used for whatever purpose you wish EXCEPT to make money. Due credit would be appreciated and please report to me any faults found (Mindenjohn c/o RWA).

The Freeware used as basis for the repaints are the intellectual property of Michael Stephan (Great Northerner) who generously allows their use. The Payware copyrights lie with their authors and the .Geopcdx files are omitted from the downloads to protect their rights.

Please respect all Intellectual rights. For these repaints to work you must have the relevant original dlc.
 
Installation

Unzip the download file (use Winzip or 7z) this will then display the zipped Railworks file.
Unzip the Railworks file and then drop that folder into your Program Files (x86)\Steam\steamapps\common files or
open the Railworks folder downloaded copy the three folders within (Ctrl+C), drill down to YOUR Assets folder and then drop the copied folders into YOUR Assets folder (Ctrl+V).

Locomotives

DTM GE 44 Ton - This is Payware

The repaint is based on the DTM PRR GE 44Ton loco add on which is a requirement for these 44 Ton loco repaints to work
https://store.steampowered.com/search/?term=Train+Simulator%3A+PRR+GE+44+Loco+Add-On&supportedlang=english&ndl=1

Go to your Assets\DTM\GE 44 Ton\RailVehicles\Pennsylvania\Engine folder. Copy the GE 44 Ton_Penn.GEOPCDX file and
then drop it into the: Pogwassek\Engine and Pogwassek_dirty\Engine folders.

When you start up TSC the locos appear in the middle Left Hand flyover of the editor as : GE 44Ton PIR and GE 44Ton PIR_dirty.

There are 6 dynamic numbers. You must check in the top right hand flyout assets box DTM\GE 44 Ton.

G-Trax Boston & Albany Alco HH660 - This is Payware

This repaint is based on the Alco HH660 switcher which is included in the Boston & Albany Route by G-trax available on Steam
https://store.steampowered.com/app/2202028/Train_Simulator_Boston__Albany_Boston__Springfield_Route_AddOn/

There is an older Freeware version but I chose to use this later updated version (I think because dynamic numbering was easier?).

Go to your Assets\G-Trax\BostonAlbany\RailVehicles\Diesel\HH600 BnA\Engine folder. Copy the HH600_BnA.GEOPCDX file and
then drop it into the: HH600 PIR\Engine and HH600 PIR_dirty\Engine folders.

When you start up TSC the locos appear in the middle Left Hand flyover of the editor as : ALCo HH600 PIR and ALCo HH600 PIR_dirty
There are 5 dynamic numbers. You must check in the top right hand flyout assets box G-Trax\BostonAlbany.

Freight Stock

Caboose  - Thanks to Michael Stephan's generosity these are Freeware with dynamic numbering.

The Caboose cars are based on the Great Northern X200 caboose available at: http://www.golden-age-rails.com/packsrw/gnx200.html
and their .Geopcdx files are pre-installed. The repaints appear in TSC assets box as Caboose wood PIR and Caboose wood PIR_Dirty.
There are 50 dynamic numbers (more than enough for the island!!)
You must check in the top right hand flyout assets box GreatNortherner\GNRy.

Flat Cars - Thanks to Michael Stephan's generosity these are Freeware with dynamic numbering.

The Flat cars are repaints of the GreatNortherner\Milwpack 50ft flat car available at: http://www.golden-age-rails.com/packsrw/milwpack.html
and their .Geopcdx files are pre-installed. The repaints appear in TSC assets box as PIR Flatcar 52ft Cable/crates/etc AND
for the mainland as PCI Flatcar 52ft etc You must check in the top right hand flyout assets box GreatNortherner\Milwpack.

Mindenjohn, West Yorkshire, UK
July 2023