by Kris (kris120)
This package contains patches providing compatibility with the
"EMD 16N-710G3C - SOUND ENHANCEMENT PACK" from SearchlightSimulations
to the following repaints (full list below)
Patches for EMD SD70ACe Repaints in Assets\RSC\SD70Pack02
===================================================================
by kris120
Introduction
==================
This package contains patches providing compatibility with the
"EMD 16N-710G3C - SOUND ENHANCEMENT PACK" from SearchlightSimulations
to the following repaints (full list below):
Weathered CN SD70M-2 by ET44C4
CN SD70 Pack by Kyle M (RailfanKyle)
Florida East Coast SD70M-2 Pack* (blue and yellow EMD SD70M-2s)
FEC/RailAmerica SD70M-2 Pack by Jason (JM1261)
BNSF Golden Swoosh SD70ACe by Jerremee Jones (BNSF511)
Montana Rail Link (MRL) SD70ACe Re-Paints by Michael (bobbel66) Zimmer
Providence and Worcester SD70M-2s by Jason (JM1261)
Tacoma Rail SD70ACe-P4s by Jason (JM1261)
Union Pacific SD70Ace Iso Cab by Matthew Onusz (sabreman61)
and the following packages by Chris and Jerres Paintshop. :
CN 8952/8898
CP SD70ACu
CP Veterans SD70ACU Pack 1
EMDX Demonstrator
You may want to install my other package
Soundpatches for "EMD 16N-710G3C - SOUND ENHANCEMENT PACK"
in parallel.
Features
==================
- Full installation of all repaints via a detailed installation script.
No copying of files needed.
All locos (the locos by DTG, too) get this patched:
- Dryfriction, Wetfriction and Snowfriction rized to 1/0.8/0.6
The original values work only with empty wagons.
- Default/Cabview/Textures/sd70_NEW.TgPcDx : Visibility of inscriptions for Idle,N1-N8 a bit increased.
This is copied to all installed repaints.
While running the script you are asked whether you want to apply this patch or keep the original textures.
- RSC\SD70Pack02\RailVehicles\Diesel\SD70\Default\Cabview\SD70 Cab camera.xml :
A Cabcamera with different viewing angles, view to the handles and backwards.
This Cabcamera file is used by all locos. No separate camera for any loco is necessary.
- Just as there was a question about SD70 by MRL with Whisper Cabs:
I have added a zip-file "MRL-Whisper.zip" with versions for the Whisper Cab.
On the one hand the numbers repainted by Michael Zimmer are all Non-Iso in reality.
On the other hand, the differences between the Non-Iso variant and the Whisper are almost
negligible in TS. I have tried to create a somewhat quieter bogie sound in a separate proxy.
Therefore work the locos in MRL-Whisper.zip only with my Soundpatches in the other (sound-)pack.
Normally it would take separate recordings for the Whisper to show the differences in frequency distribution.
- Quickdrive consists for the "SD70ACu CP" and MRL locos (optional).
Please install the needed packages before running the installation script.
Check the list below.
- Inputmapper using key "N" to stop the bell immediately.
- Loaded version of the grain hopper, couplings patch.
Installation
==================
1. Install all the repaints you wish (see list at the end) like that:
For installation do only plain unpacking and placing of the files in
Railworks\Assets\RSC\SD70Pack02\
Do NOT copy any files (GeoPcDx, Cabview folders etc.),
though the script should work with already fully installed repaints, too.
Copying of the neccessary files is done in step 4.
Again: You do not need to install all repaints,
you may repeatedly run the script and so add other repaints later.
2. Install the rwp file SD70ACe-Repaint-patches_MLWaudio_by_kris120_2022-01-03.rwp
with utilities.exe (inside the Railworks\ folder)
4. Goto Railworks\Assets\RSC\ and run the script
"Install_SD70ACe-MLW-Repaints_SD70Pack02.cmd"
This completes the installation of the repaints (e.g. copying of GeoPcDx),
applies all necessary patches for MLW-compatibility and
activates the quickdrive consists when all dependencies are fulfilled.
If you want to add other repaints from the list later you may keep the script and the folder Assets\RSC\x\ .
Otherwise is is better to choose deleting the folder "x\" and the script itself at the end of the script.
_______________________________________________________________________________________________
List of patched repaints:
==================================
Some repaints may not be available now. Check this: (NA)
Weathered CN SD70M-2 by ET44C4
http://www.railworksamerica.com/index.php/download-library/engine-repaints?view=document&id=2591:weathered-cn-sd70m-2&catid=18:engine-repaints
CN SD70 Pack by Kyle M (RailfanKyle)
http://www.railworksamerica.com/index.php/download-library/engine-repaints?view=document&id=2292:cn-sd70-pack&catid=18:engine-repaints
and https://chrisandjerrespaintshed.weebly.com/
CN\
CN 2\
CN Demo Paint\
CN 8952/8898 (SS Enhanced OR Vanilla - does't matter)
https://chrisandjerrespaintshed.weebly.com/bundles.html
CN 8898\
GTW\
CP SD70ACu
https://chrisandjerrespaintshed.weebly.com/prototypical.html
CP SD70ACu\
You need the ABStudios Freight pack installed for a mixed CP/BNSF container consist (optional):
https://airbournestudios4.wixsite.com/abstudios-rw/freight-car-pack-1
This consits appears as EMD SD70ACe / "EMD SD70ACu CP + BNSF x2 + 96 Containers (SD70P02)[ABS]"
and will be installed to ABStudios\ABS Freight Pack\PreLoad\ (hint at the last postion of the name)
CP Veterans SD70ACU Pack 1
https://chrisandjerrespaintshed.weebly.com/bundles.html
CP 7020\
CP 7021\
CP 7022\
Demonstrator
https://chrisandjerresshed.blogspot.com/2016/10/emdx-sd70ace.html
download: http://www.mediafire.com/file/l8rhqdtrgyifxuu/EMDX-SD70ACe.zip/file
I have patched this only as "GMDX SD70ACe Demos*" from cleartrackstrainsim.wixsite.com/ is NA (numbers have some issues)
The driver loco shows now statically the number painted at the side of the cab, the nd and DP variants use dynamic numbers according to wikipedia
EMDX\
Florida East Coast SD70M-2 Pack* (blue and yellow EMD SD70M-2s)
cleartrackstrainsim.wixsite.com (NA)
FEC100\ - FEC103\
FEC/RailAmerica SD70M-2 Pack by Jason (JM1261)
http://www.railworksamerica.com/index.php/download-library/engine-repaints?view=document&id=2225:fec-railamerica-sd70m-2-pack&catid=18:engine-repaints
or khangt25.wixsite.com-ylrrailworks-jm1261-addons (NA)
FEC105\ - FEC 107\ RailAmerica\
BNSF Golden Swoosh SD70ACe by Jerremee Jones (BNSF511)
http://www.railworksamerica.com/index.php/download-library/engine-repaints?view=document&id=2310:bnsf-golden-swoosh-sd70ace&catid=18:engine-repaints
and https://chrisandjerresshed.blogspot.com/2016/11/tacoma-rail-sd70ace.html
and https://chrisandjerrespaintshed.weebly.com/fictional.html
download: https://www.mediafire.com/file/sc119fgpl9jlf7u/Golden_ACe.zip/file
Golden Swoosh\
Montana Rail Link (MRL) SD70ACe Re-Paints by Michael (bobbel66) Zimmer.
http://railworksamerica.com/index.php/download-library/engine-repaints?view=document&id=833:montana-rail-link-mrl-sd70ace-re-paints&catid=18:engine-repaints
and http://railworks.banal.net/downloads/downloads.html
MRL-43xx\ (MRL-4300 - MRL-4315)
You need the following packages installed for quickdrive consists:
- MRL Gas local
appears as EMD SD70ACe / "EMD SD70ACe MRL x2 Gas local x17 LD (SD70P02,Mainlines)[SL-JR-23k]"
and will be installed in SearchlightSimulations\JR23k_Tank\PreLoad\ by the script.
- "JointedRail 23,000 Gal Tanker Car Set *Freeware*" by Jessie James :
https://www.tapatalk.com/groups/digirails_forums/jointedrail-23-000-gal-tanker-car-set-t669.html#p2500
On the bottom of the page you'll find a link offering the original wagons.
- "JointedRail 23,000 Gal TILX Tank Cars *Freeware*" by Jessie James https://www.tapatalk.com/groups/digirails_forums/jointedrail-23-000-gal-tilx-tank-cars-t704.html
- "MRL 50ft FMC Boxcar v2" by Harry Adkins
http://railworksamerica.com/index.php/download-library/rolling-stock-repaints?view=document&id=2190:mrl-50ft-fmc-boxcar-v2&catid=19:rolling-stock-repaints
correct physics with: http://railworksamerica.com/index.php/download-library/rolling-stock-repaints?view=document&id=3702:mainelines-boxcars-reefers-and-covered-hoppers-upgrades&catid=19:rolling-stock-repaints
- BNSF coal train with MRL helpers:
appears under "GE ES44DC" as "GE ES44DC BNSF x3,2, + MRL SD70ACe x,2,2 + 113 Coalcars LD (SD70P02 !)[...]"
needs these installed:
- The ES44DC may be from Marias Pass or HiLine, both may be MLW-patched :
"MLW Audio for HiLine" by myself (recommended is one of the rwp files with a "1" at the filename):
http://railworksamerica.com/index.php/download-library/sounds-enhancements?view=document&id=3335:mlw-audio-for-hiline&catid=25:sounds
OR
"Montana Hi-Line Searchlight Sounds Patches" from:
https://www.trainsimcommunity.com/mods/c1-train-simulator/c94-sounds/i1672-montana-hi-line-searchlight-sounds-patches
OR
just the regular GEVO soundpack by Searchlinesimulations
OR
the plain ES44 from Marias Pass or the HiLine.
- BN Black Hoppers by Buzz Baxter (Buzz456) :
http://www.railworksamerica.com/index.php/download-library/rolling-stock-repaints?view=document&id=3114:bn-black-hoppers&catid=19:rolling-stock-repaints
- BN Green Hoppers by Buzz Baxter (Buzz456) :
http://www.railworksamerica.com/index.php/download-library/rolling-stock-repaints?view=document&id=3115:bn-green-hoppers&catid=19:rolling-stock-repaints
AND / OR
- ABStudios Freight pack :
https://airbournestudios4.wixsite.com/abstudios-rw/freight-car-pack-1
Providence and Worcester SD70M-2s by Jason (JM1261)
http://railworksamerica.com/index.php/download-library/engine-repaints?view=document&id=3043:providence-and-worcester-sd70m-2s&catid=18:engine-repaints
and cleartrackstrainsim.wixsite.com/ (NA)
PW4301\
PW4302\
Tacoma Rail SD70ACe-P4s by Jason (JM1261)
http://www.railworksamerica.com/index.php/download-library/engine-repaints?view=document&id=2303:tacoma-rail-sd70ace-p4s&catid=18:engine-repaints
and https://chrisandjerresshed.blogspot.com/2016/11/tacoma-rail-sd70ac (NA)
TR\
TR7001\
Union Pacific SD70Ace Iso Cab by Matthew Onusz (sabreman61) :
http://railworksamerica.com/index.php/download-library/engine-repaints?view=document&id=1417:union-pacific-sd70ace-iso-cab&catid=18:engine-repaints
UP SD70ACe Whisper\
History
===========
1/3/2022 v1 First release on digirails
2/8/2022 v1.1 Update published on digirails, RWA, trainsimcommunity
Script updated:
- works now when MRL-repaints are not available, for details look inside the script
- patch for Cabtexture works now for the original locos (no repaints), too.
Cabcamera very slightly changed
_______________________________________________________________________________________________
Please do not redistribute this file or use it for your own profit. The logos and markings used on these reskins are property of their respective owners.
I am not responsible for any damage by this package, especially by the script. If unsure: read it, understand it and report issues.
A backup created before installing anything will help in any case.
IMPORTANT NOTICE. This is user generated content designed for use with Dovetail Games Software.
Dovetail Games does not approve or endorse this user generated content and does not accept any liability or responsibility regarding it.
This user generated content has not been screened or tested by Dovetail Games. Accordingly, it may adversely affect your use of Dovetail Games’ products. If you install this user generated content and it infringes the rules regarding user-generated content, Dovetail Games may choose to discontinue any support for that product which they may otherwise have provided.
The Dovetail Games EULA sets out in detail how user generated content may be used, which you can review further here: www.dovetailgames.com/terms. In particular, this user generated content includes work which remains the intellectual property of Dovetail Games and which may not be rented, leased, sub-licensed, modified, adapted, copied, reproduced or redistributed without the permission of Dovetail Games.
Please remember even those this file is free, the author still has rights to the file. Be sure to read the readme that is enclosed for further copyright information and instructions to install the file.
DTG's Required Disclaimer
"IMPORTANT NOTICE. Everything on this site is user generated content designed for use with RailSimulator.com Limited’s train simulation products, including RailWorks 4: Train Simulator 2013, Train Simulator 2014 and Train Simulator 2015. RailSimulator.com Limited does not approve or endorse this user generated content and does not accept any liability or responsibility regarding it.
This user generated content has not been screened or tested by RailSimulator.com Limited. Accordingly, it may adversely affect your use of RailSimulator.com’s products. If you install this user generated content and it infringes the rules regarding user-generated content, RailSimulator.com Limited may choose to discontinue any support for that product which they may otherwise have provided.
The RailWorks EULA sets out in detail how user generated content may be used, which you can review further here: www.railsimulator.com/terms. In particular, this user generated content includes work which remains the intellectual property of RailSimulator.com Limited and which may not be rented, leased, sub-licensed, modified, adapted,copied, reproduced or redistributed without the permission of RailSimulator.com Limited."
We have 1509 guests and no members online