BAR SW1200 Blue (DTM)

You must have the DTM SW1200-DRG addon (available at Steam
https://store.steampowered.com/app/1012100/Train_Simulator_DRGW_SW1200_Loco_AddOn/?curator_clanid=958135&;curator_listid=43424)
for this repaint to work.

This is a repaint of the DTM SW1200-DRG switcher.EMD SW1200 and SW9 are very similar, the difference is under the hood the SW9 having 900hp,
SW1200 has 1200hp.
It is repainted into a livery of the Bangor & Aroostook Railroad (BAR) of Northern Maine, USA. The Fort Kent to Eagle Lake route by
Rich Garber available on Steam (https://store.steampowered.com/app/24055/Train_Simulator_Fort_Kent_to_Eagle_Lake_Route_AddOn/
is based on BAR track. BAR did not have any SW1200 but did have 5 SW9s and thoe are in this pack with dynamic numbering.
BAR SW9s had 2 digit numbers; the DTM model uses 3 digit numbering. Using only 2 of the 3 digits would leave numbers offset on the cabside
so I have "doctored" the numbers such that engine #30 is X0X, engine #33 is X3X, engine #39 is X9X etc in the display flyout on the right
but shows on the engine as 30, 33 and 39 in these examples. I have done this by "squeezing" in 2 digits in the space of 1 so that
the displayed number on the cabside and number board is central
There are 5 dynamic numbers displaying on the engine as 31, 32, 33, 36 and 39.

To install:

Unzip the 7z file to your desktop. Click on the file and unzip the .rwp file within.
Click on the Railworks folder and drop the "Assets" folder into your Railworks folder on your hard drive
or drill down to the DTM\SW1200-DRG\RailVehicles folder and drop the repaint file (Diesel-BAR_Blue) into that folder.
Then open the DTM\SW1200-DRG\RailVehicles\Diesel\Engine folder and copy and paste the SW1200_DRGW.GEOPCDX file into the
Diesel-BAR\Engine folder.
Then open the DTM\SW1200-DRG\RailVehicles\Diesel\CabView folder and copy and paste the SW1200_Cab into the Diesel-BAR_Blue\CabView folder.
It will appear in the Assets list as EMD SW1200 BAR_Blue and EMD SW1200 BAR_Blue NC with dynamic numbering.

This repaint is freeware and you may use it as you will at your own risk except make money from it.

Mindenjohn
RWA member