cement plant

[AntonLchange]

I a'm trying to run NS-local 2 and at the cement plant dry deliverys but it will not load.
But how can i load at a delivery point? (pic)

Will someone me point in the right direction?
All help wellcome. Thanks in advance
Ton

[thecanadianrail]

what you are seeing is an UN-loading point, any loading point is from above, and unloading is underneath!

[hminky]

what you are seeing is an UN-loading point, any loading point is from above, and unloading is underneath!

When I used the "unloader" on my route it would unload and load depending on whether the car is loaded or not-loaded.

Harold

[hughes407]

Ton,

The problem with the Local 2 scenario is that it sends you to the Cement Plant rather than the Quarry. There is no loader at the location called for in the task list. I had to edit the scenario to go to the quarry loader and all is well with the world now.

By the way, I have a note that the hoppers need to be loaded back to front. As I recall, it has to do with blocking the run-around track if you do it front to back.

Don

[AntonLchange]

Thanks Don. Frontend loading was the second try. First did a backend. Starting over ( no problem ) will it work
if i go to the quarry instet of the cementplant?
Will check that out.
Thanks sofar.
Ton

[hughes407]

No, Ton, it won't. The instructions in the scenario require you to go to the Cement Plant rather than the Quarry. It requires you to do a load which you cannot do at that location, to the best of my knowledge.

I haven't used the forum messaging system here but if you can get a message through to me with your e-mail address, I'll send you the scenario as I have modified it.

Don

[AntonLchange]

Correct. It did'nt work. Verry kind to send your versie. Will send email.
Ton