Can anyone do RJ Corman in SD40-2 scheme?

Post your FREEWARE 'Works in Progress' here!
Topic locked

Re: Can anyone do RJ Corman in SD40-2 scheme?

Unread postby buzz456 » Fri Jun 28, 2013 6:42 am

It would be taking a little licsense but did Dick Cowen do a SW2. This is a 1, however?
Image
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
Image
User avatar
buzz456
Site Admin
 
Posts: 20949
Joined: Sun Mar 21, 2010 8:30 am
Location: SW Florida
Top

Re: Can anyone do RJ Corman in SD40-2 scheme?

Unread postby Marleyman » Fri Jun 28, 2013 8:28 am

I will do the GP9 and take that from the GP9Add on pack
I will do the F7 but that will have to come from The Horseshoe Curve Route as the other F7's have double headlights.
I could do a SW1500 in lieu of any suitable swithcher being available if it does not 'offend' anyone.

And if anyone finds a suitable coal hopper in any pack that will look good, let me know which pack it is in and I will add that if I have the pack.
My Railworks 2 Catalogue; http://www.railworks.marleyman.co.uk/
and My RWTS2013 Download Store http://www.railworks.marleyman.co.uk/store/
User avatar
Marleyman
 
Posts: 357
Joined: Fri Dec 10, 2010 4:46 pm
Location: UK
Top

Re: Can anyone do RJ Corman in SD40-2 scheme?

Unread postby glenn68 » Fri Jun 28, 2013 9:19 am

Marleyman wrote:I will do the GP9 and take that from the GP9Add on pack
I will do the F7 but that will have to come from The Horseshoe Curve Route as the other F7's have double headlights.
I could do a SW1500 in lieu of any suitable swithcher being available if it does not 'offend' anyone.

And if anyone finds a suitable coal hopper in any pack that will look good, let me know which pack it is in and I will add that if I have the pack.


That would seem fine.
User avatar
glenn68
 
Posts: 967
Joined: Mon Aug 09, 2010 1:21 pm
Top

Re: Can anyone do RJ Corman in SD40-2 scheme?

Unread postby Marleyman » Fri Jun 28, 2013 9:39 am

good, because I started already :)

RJC R9004c TS2013 1.JPG
You do not have the required permissions to view the files attached to this post.
My Railworks 2 Catalogue; http://www.railworks.marleyman.co.uk/
and My RWTS2013 Download Store http://www.railworks.marleyman.co.uk/store/
User avatar
Marleyman
 
Posts: 357
Joined: Fri Dec 10, 2010 4:46 pm
Location: UK
Top

Re: Can anyone do RJ Corman in SD40-2 scheme?

Unread postby Marleyman » Fri Jun 28, 2013 11:04 am

Almost done, just no more of the day left to complete it.

RJC R9004c TS2013 2.JPG
You do not have the required permissions to view the files attached to this post.
Last edited by Marleyman on Fri Jun 28, 2013 4:18 pm, edited 1 time in total.
My Railworks 2 Catalogue; http://www.railworks.marleyman.co.uk/
and My RWTS2013 Download Store http://www.railworks.marleyman.co.uk/store/
User avatar
Marleyman
 
Posts: 357
Joined: Fri Dec 10, 2010 4:46 pm
Location: UK
Top

Re: Can anyone do RJ Corman in SD40-2 scheme?

Unread postby glenn68 » Fri Jun 28, 2013 12:36 pm

That looks good.
User avatar
glenn68
 
Posts: 967
Joined: Mon Aug 09, 2010 1:21 pm
Top

Re: Can anyone do RJ Corman in SD40-2 scheme?

Unread postby nssd80mackid » Fri Jun 28, 2013 1:23 pm

What pack is that from or DLC?
CPU- Ryzen 7 3700x
Ram- Corsair RGB Vengeance 32 GB 3600mhz
GPU- Evga RTX 3080 FTW3
SSD- Samsung 860 evo 500GB
HDD- Hitachi 1TB
User avatar
nssd80mackid
 
Posts: 344
Joined: Fri Aug 17, 2012 5:04 pm
Location: New Jersey
Top

Re: Can anyone do RJ Corman in SD40-2 scheme?

Unread postby Marleyman » Fri Jun 28, 2013 4:17 pm

nssd80mackid wrote:What pack is that from or DLC?


It is from the GP9 pack as it is the only one with the 'ditch lights' on the front.
My Railworks 2 Catalogue; http://www.railworks.marleyman.co.uk/
and My RWTS2013 Download Store http://www.railworks.marleyman.co.uk/store/
User avatar
Marleyman
 
Posts: 357
Joined: Fri Dec 10, 2010 4:46 pm
Location: UK
Top

Re: Can anyone do RJ Corman in SD40-2 scheme?

Unread postby buzz456 » Fri Jun 28, 2013 8:37 pm

This is interesting. It appears to be the closest hopper and it's the wood chip that is in both Sherman Hill, SD75Pack01 and Maria's Pass.
woodchip.jpg


Any other entries?
You do not have the required permissions to view the files attached to this post.
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
Image
User avatar
buzz456
Site Admin
 
Posts: 20949
Joined: Sun Mar 21, 2010 8:30 am
Location: SW Florida
Top

Re: Can anyone do RJ Corman in SD40-2 scheme?

Unread postby Marleyman » Sat Jun 29, 2013 4:39 am

I have that hopper then, so unless a better option is listed before i get to it, I will use that one.
My Railworks 2 Catalogue; http://www.railworks.marleyman.co.uk/
and My RWTS2013 Download Store http://www.railworks.marleyman.co.uk/store/
User avatar
Marleyman
 
Posts: 357
Joined: Fri Dec 10, 2010 4:46 pm
Location: UK
Top

Re: Can anyone do RJ Corman in SD40-2 scheme?

Unread postby imnew » Sat Jun 29, 2013 6:48 am

Go for it mm.
Intel Core I7-7770K, ZOTAC GTX 1080 Ti AMP
Extreme, ASUS ROG Strix Z270H, 16 GB HyperX Fury DDR4, Samsung 850 EVO 500GB, Corsair Force MP500 240GB M.2, 34" Ultra Wide Samsung Monitor
User avatar
imnew
 
Posts: 2456
Joined: Tue Aug 25, 2009 1:41 pm
Top

Re: Can anyone do RJ Corman in SD40-2 scheme?

Unread postby PapaXpress » Sat Jun 29, 2013 3:25 pm

Michael Stephan has a woodchip hopper. Then people who do not have SH can use your repaint.
Image
"Just post some random unrelated text. We have members here who can help you with that." ~ Chacal
"When all else fails, read the instructions... if that doesn't work either, try following them." ~ Old Prof
Image
The Grade Crossing - Atlanta North Project - Virtual Rail Creations
User avatar
PapaXpress
 
Posts: 5147
Joined: Sat Oct 23, 2010 10:30 pm
Location: that "other" timezone
Top

Re: Can anyone do RJ Corman in SD40-2 scheme?

Unread postby Marleyman » Sun Jun 30, 2013 10:44 am

PapaXpress wrote:Michael Stephan has a woodchip hopper. Then people who do not have SH can use your repaint.


can you point me to that, I doubt I have it? Thanks.
My Railworks 2 Catalogue; http://www.railworks.marleyman.co.uk/
and My RWTS2013 Download Store http://www.railworks.marleyman.co.uk/store/
User avatar
Marleyman
 
Posts: 357
Joined: Fri Dec 10, 2010 4:46 pm
Location: UK
Top

Re: Can anyone do RJ Corman in SD40-2 scheme?

Unread postby Marleyman » Sun Jun 30, 2013 10:47 am

Expanded my plan again. I have made 2 versions of the GP9. One circa 2010 and one circa 2012. The only difference is the roof and some silver on the step board at the bottom. I thought it would be good to have the 2 variants as they will create a subtle enhancement to any scenarios created.

RJC R9004c TS2013 red.JPG


RJC R9002c TS2013 white.JPG


RJC fam.JPG


I will get onto the next loco now and release as a pack.
You do not have the required permissions to view the files attached to this post.
My Railworks 2 Catalogue; http://www.railworks.marleyman.co.uk/
and My RWTS2013 Download Store http://www.railworks.marleyman.co.uk/store/
User avatar
Marleyman
 
Posts: 357
Joined: Fri Dec 10, 2010 4:46 pm
Location: UK
Top

Re: Can anyone do RJ Corman in SD40-2 scheme?

Unread postby rizzo20 » Sun Jun 30, 2013 11:00 am

MM, looking great! That style of hopper probably is the closest you'll find, I think it will work out awesome!
rizzo20
 
Top
PreviousNext
Topic locked

Return to Freeware WIP

Who is online

Users browsing this forum: No registered users and 0 guests

Powered by phpBB® Forum Software © phpBB Group