A+ A A-

EMD SD75M & SD75I Physics Mod Pack

document
Version:
TS 2016
Uploaded:
Saturday, 31 October 2015
Hits:
2729
Downloads:
831
Rating:
(9 Votes)

EMD SD75M & SD75I Physics Mod Pack by Mike Kam (FanRailer)

TS2016_Railworks_EMD_SD75M_and_SD75I_Physics_Mod_Pack.rar - 244 kb

Physics mod for SD75 variants

Description

 

This is the EMD SD75 Series Physics Modification pack for the SD75M and SD75I.

In order to utilize this freeware physics upgrade, you must have purchased the "Train Simulator: BNSF SD75 Loco Add-On" pack available at Steam: http://store.steampowered.com/app/65259/

This is a freeware pack; in no way is it to be used for commercial purposes. You are free, however to further modify the physics enhancements found in this pack for personal use if you so choose.

THIS IS NOT A SOUND UPGRADE PACK. Physics adjustments made around the existing sounds.

The purpose of this pack is to adjust the locomotive weight, motor amperage limits, and traction and braking effort values for more realistic operation.

Also included is the signature JohnS brake fix and headlight fix.

General Parameter Change Log (same for both locomotive classes):
1. Adjusted locomotive weights slightly.
2. Adjusted tractive effort ratings and curves for individual locomotive models based on the specifications listed below.
3. Adjusted dynamic brake effort ratings and curves for individual locomotive models based on the specifications listed below.
4. Adjusted fuel consumption and prime mover RPM range.
5. Reduced amount of coupler stretch.

Specifications for individual models:
1. EMD SD75M (EMD 16-710G3C; 4300 GHP)
 a. Starting tractive effort of 175,000 lbs (778.44 kN) up to 8.687 mph.
 b. Traction horsepower at wheel is 4,050 hp (3,022.389 kW); efficiency rating of 90%.
 c. Max Dynamic Brake effort of 86,850 lbs (386.328 kN) from 22.4 mph to 9 mph; fade to 0 lbs @ 3 mph.
 d. Dynamic Brake horsepower at wheel is 4,556 hp (3,400 kW).
 e. Increased weight of 176.903 metric tons (390,000 lbs).
 f. Maximum speed of 70 mph.
 g. Fuel consumption @ notch 8 is 205 gallons per hour.
 h. Prime mover RPM range is 290 to 950.
 i. Ammeter range is -700 to 1785.

2. EMD SD75I (EMD 16-710G3C; 4300 GHP)
 a. Starting tractive effort of 175,000 lbs (778.44 kN) up to 8.687 mph.
 b. Traction horsepower at wheel is 4,050 hp (3,022.389 kW); efficiency rating of 90%.
 c. Max Dynamic Brake effort of 86,850 lbs (386.328 kN) from 22.4 mph to 9 mph; fade to 0 lbs @ 3 mph.
 d. Dynamic Brake horsepower at wheel is 4,556 hp (3,400 kW).
 e. Increased weight of 180.532 metric tons (398,000 lbs).
 f. Maximum speed of 70 mph.
 g. Fuel consumption @ notch 8 is 205 gallons per hour.
 h. Prime mover RPM range is 290 to 950.
 i. Ammeter range is -700 to 1785.

IMPORTANT; Install Instructions

1. Locate the RSC assets folder (C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\RSC\SD75Pack01)
2. Open Railworks_EMD_SD75M_and_SD75I_Physics_Mod_Pack.rar
3. Drag the file folder from the .rar in step 2 into the directory you opened in step 1. Overwrite if asked.
4. The installation should be complete. Run TS2016 to check.


Thank you for downloading and installing.
Enjoy =)

Please accept license agreement before downloading

Please remember even those this file is free, the author still has rights to the file. Be sure to read the readme that is enclosed for further copyright information and instructions to install the file.

 

DTG's Required Disclaimer

"IMPORTANT NOTICE. Everything on this site is user generated content designed for use with RailSimulator.com Limited’s train simulation products, including RailWorks 4: Train Simulator 2013, Train Simulator 2014 and Train Simulator 2015. RailSimulator.com Limited does not approve or endorse this user generated content and does not accept any liability or responsibility regarding it.

This user generated content has not been screened or tested by RailSimulator.com Limited. Accordingly, it may adversely affect your use of RailSimulator.com’s products. If you install this user generated content and it infringes the rules regarding user-generated content, RailSimulator.com Limited may choose to discontinue any support for that product which they may otherwise have provided.

The RailWorks EULA sets out in detail how user generated content may be used, which you can review further here: www.railsimulator.com/terms. In particular, this user generated content includes work which remains the intellectual property of RailSimulator.com Limited and which may not be rented, leased, sub-licensed, modified, adapted,copied, reproduced or redistributed without the permission of RailSimulator.com Limited."

HOT NEWS

Search Entire Site

Latest additions in this category

Created: August 25, 2019
Hits: 385 - Downloads: 74
Created: August 17, 2019
Hits: 513 - Downloads: 51
Created: August 11, 2019
Hits: 479 - Downloads: 71
Created: July 14, 2019
Hits: 430 - Downloads: 62
Created: June 24, 2019
Hits: 594 - Downloads: 126

Visitors Counter

15249244
Today
Yesterday
This Week
This Month
Last Month
6832
5094
50792
189380
226929

Your IP: 18.207.136.184

Who's Online

We have 1083 guests and no members online

blue green orange red

Copyright 2018 by Mutagenix - A subsidiary of the NERR Network. Best viewed at 1280 x or more.