A+ A A-

TS2015 Kuju Black ES44AC Physics Mod Pack

document
Version:
TS 2015
Uploaded:
Sunday, 16 November 2014
Hits:
17842
Downloads:
755

TS2015 Kuju Black ES44AC Physics Mod Pack by Mike Kam (FanRailer)

TS2015_Kuju_GE_ES44AC_Physics_Mod_Pack.rar - 177 kb

Replacing stock locomotive physics with unique model specific physics

Description

 

This is a Kuju GE ES44AC Physics Modification pack (One of perhaps several).

In order to utilize this freeware physics upgrade, you must have purchased the "US Loco & Asset Pack" available at Steam: http://store.steampowered.com/app/208306/

This is a freeware pack; in no way is it to be used for commercial purposes. You are free, however to further modify the physics enhancements found in this pack for personal use if you so choose.

THIS IS NOT A SOUND UPGRADE PACK. Physics adjustments made around the existing sounds.

The purpose of this pack is to adjust the locomotive weight, motor amperage limits, and traction and braking effort values for more realistic operation.

This pack includes the ability to switch between the standard ES44AC and the high adhesion ES44AC. More details below.

General Parameter Change Log:
1. Changed HUD ammeter function so that it displays tractive/braking effort in thousands of pounds. This means that if the HUD ammeter reads "157 Amps", the locomotive is putting out 157,000 lbs of tractive effort. Conversely, if the HUD ammeter reads "-34.52 Amps", the locomotive is putting out 34,520 lbs of dynamic braking effort.
2. Adjusted tractive effort ratings and curves for individual locomotive variants based on the specifications listed below.
3. Adjusted dynamic brake effort ratings and curves for individual locomotive variants based on the specifications listed below.


Specific horsepower and tractive effort ratings used in calculation for individual locomotive variants:
1. GE ES44AC Standard Adhesion (GE GEVO-12; 4400 THP)
 a. Starting tractive effort of 180,000 lbs (800.68 kN) up to 8.2714 mph.
 b. Traction horsepower at wheel is 3,966.4 hp (2,960 kW).
 c. Max Dynamic Brake effort of 117,000 lbs (520.442 kN) from 16.51 mph to 3 mph; linear fade from that speed to 0 lbs @ 1 mph.
 d. Dynamic Brake horsepower at wheel is 5,145.6 hp (3,840 kW).
 e. Increased weight of 188.7 metric tons (416,008.02 lbs).
 f. Maximum speed of 75 mph.
 g. Fuel consumption @ notch 8 is 210 gallons per hour.

2. GE ES44AC High Adhesion (GE GEVO-12; 4400 THP)
 a. Starting tractive effort of 198,000 lbs (880.8 kN) up to 7.519 mph.
 b. Traction horsepower at wheel is 3,966.4 hp (2,960 kW).
 c. Max Dynamic Brake effort of 117,000 lbs (520.442 kN) from 16.51 mph to 3 mph; linear fade from that speed to 0 lbs @ 1 mph.
 d. Dynamic Brake horsepower at wheel is 5,145.6 hp (3,840 kW).
 e. Increased weight of 195.954 metric tons (432,000.1884 lbs).
 f. Maximum speed of 75 mph.
 g. Fuel consumption @ notch 8 is 210 gallons per hour.


IMPORTANT; Install Instructions

1. Locate the following directory: (C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\Kuju\RailsimulatorUS)
2. Open Railworks_GE_ES44AC_Physics_Mod_Pack.rar
2a. Before proceeding to step 3, make sure your "Kuju" folder is NOT set to "read only". You can change the folder settings using the properties function. IF the "Kuju" folder is read only, the files will not overwrite existing files when you attempt step 3.
3. Drag the file folder from the .rar in step 2 into the directory you opened in step 1. Overwrite if asked.
4. The installation should be complete. Run TS2015 to check.

User's Manual:
Upon installation, the pack defaults to using the high adhesion ES44AC Physics. In order to switch physics, follow the steps below:

1. Open the following directories:
 a. "C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\Kuju\RailsimulatorUS\RailVehicles\Diesel\ES44AC\Black\Simulation"
 b. "C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\Kuju\RailsimulatorUS\RailVehicles\Diesel\ES44AC\Black\Engine"
2. In each of those directories, you will see two folders (one for each set of locomotive physics):
 a. "Standard Adhesion"
 b. "High Adhesion"
3. Once you choose which set of physics to use, open the respective physics folder in both directories from step 1.
4. Copy (CTRL + C) all files you find in the opened folder located in directory 1a.
5. Proceed back to directory 1a and paste (CTRL + V) the copied files into the directory; overwrite when prompted.
6. Copy (CTRL + C) all files you find in the opened folder located in directory 1b.
7. Proceed back to directory 1b and paste (CTRL + V) the copied files into the directory; overwrite when prompted.
8. If the previous 7 steps were completed properly, the physics swap should be successful; run TS2015 to check.


Thank you for downloading and installing.
Enjoy =)

Please accept license agreement before downloading

Please remember even those this file is free, the author still has rights to the file. Be sure to read the readme that is enclosed for further copyright information and instructions to install the file.

 

DTG's Required Disclaimer

"IMPORTANT NOTICE. Everything on this site is user generated content designed for use with RailSimulator.com Limited’s train simulation products, including RailWorks 4: Train Simulator 2013, Train Simulator 2014 and Train Simulator 2015. RailSimulator.com Limited does not approve or endorse this user generated content and does not accept any liability or responsibility regarding it.

This user generated content has not been screened or tested by RailSimulator.com Limited. Accordingly, it may adversely affect your use of RailSimulator.com’s products. If you install this user generated content and it infringes the rules regarding user-generated content, RailSimulator.com Limited may choose to discontinue any support for that product which they may otherwise have provided.

The RailWorks EULA sets out in detail how user generated content may be used, which you can review further here: www.railsimulator.com/terms. In particular, this user generated content includes work which remains the intellectual property of RailSimulator.com Limited and which may not be rented, leased, sub-licensed, modified, adapted,copied, reproduced or redistributed without the permission of RailSimulator.com Limited."

HOT NEWS

Search Entire Site

Latest additions in this category

Created: October 31, 2022
Hits: 1174 - Downloads: 632
Created: July 26, 2020
Hits: 3799 - Downloads: 545
Created: August 25, 2019
Hits: 3444 - Downloads: 614
Created: August 17, 2019
Hits: 3760 - Downloads: 236
Created: August 11, 2019
Hits: 3883 - Downloads: 526

Visitors Counter

37102880
Today
Yesterday
This Week
This Month
Last Month
12744
10610
69010
491298
411802

Your IP: 34.204.3.195

Who's Online

We have 2448 guests and no members online

blue green orange red

Copyright 2018 by Mutagenix - A subsidiary of the NERR Network. Best viewed at 1280 x or more.