C&O HW  Pullman green cars.  You must have Dick Cowen (Britkit) HW cars for these repaints.

Run the installer or install manually and then put the 01-hw-bg-RW3.GeoPcDx, ce,ch,dn,and ob .GeoPcDx files into the Assets\Britkits\RollingStock\RailVehicles\Passenger\01-HW-coaches\C_O_Green\Wagon folder.   

The drum heads should be as follows:

d=blue C_O

f=yellow C_O

h=sleep like a kitten

j=train and kitten

l=Virginian

n=FFV

p=George Washington

r=Sportsman

There is a lot of confusion on the identification boards and numbers on these cars.  Let me see if I can explain this.

There is a right side flyout just like with the locomotives. For regular cars(you must be in world editor mode) double click the model. There are 13 digits. It should say xxxhxxxgx111. Just change the g to a x (FOR THE BAGGAGE CAR ONLY)and the 111 to whatever car number you want and the double letter will go away and whatever car number you have set up should appear. You can do a four digit car number by removing the 111 and the last x and putting four numbers there.  Leave the g for all the other cars.

For the observation car changing the h to something else will change out the drum head on the back of the car. The g should stay in place as that is what makes the C&O show up on the side of all but the baggage car.

If you would like to show Pullman on the main side board change the g to a m.

This should about do it. Enjoy! Buzz456 at RWA