by (wopflyer)
These are repaints of the "payware version" of the BritKits EMD FT locomotives in green and yellow demonstrator paint scheme as delivered to Western Pacific. WP ran them in semi-permanently attached A-B-B-A sets numbered 901 to 912. Each set shares the same number.
NOTE Each set is a different file you can choose from the drop-down list below. Please download only the sets you want to run, in order to limit RWA's bandwidth usage.
The Western Pacific used their FT's in semi-permanently attached sets of A-B-B-A, which means normal couplers on the nose of the A units and drawbars between the A and B units. And the whole set used the same number. For example, 901A-901B-901C-901D. Since the BritKits model does not alow using letters, you will just have the numbers ( like 901 ) for all 4 units in each set.
--------------------------------------------------------------------------------------------------------------------------------------
Installation:
1. You MUST have the payware version of the BritKits EMD FT (Kit 04 FT) installed for these repaints to work. You can purchase it at ( http://dickyjim.com/diesel.html ).
2. Unzip the WP_FT_Demos_9xx.zip file you downloaded.
3. Install each of the repaint's folders into RailWorks/Assets/BritKits/EMD/RailVehicles/Diesel/FT/.
4. Go to RailWorks/Assets/BritKits/EMD/RailVehicles/Diesel/FT/Default/Engine and copy the files ( FTA-db-RW3.GeoPcDx ) and ( FTBL-db-RW3.GeoPcDx ).
5. Copy these files into the Engine folder of each of the WP-Demo_ repaints you just installed.
6. Go to RailWorks/Assets/BritKits/EMD/RailVehicles/Diesel/FT/Default/CabView and copy the file ( F-Cab-db-RW3.GeoPcDx ).
7. Copy these files into the CabView folder of each of the WP-Demo_ repaints you just installed.
That's it, you should be good to go! I hope you enjoy these repaints of this unique and rather obscure locomotive.
Please remember even those this file is free, the author still has rights to the file. Be sure to read the readme that is enclosed for further copyright information and instructions to install the file.
DTG's Required Disclaimer
"IMPORTANT NOTICE. Everything on this site is user generated content designed for use with RailSimulator.com Limited’s train simulation products, including RailWorks 4: Train Simulator 2013, Train Simulator 2014 and Train Simulator 2015. RailSimulator.com Limited does not approve or endorse this user generated content and does not accept any liability or responsibility regarding it.
This user generated content has not been screened or tested by RailSimulator.com Limited. Accordingly, it may adversely affect your use of RailSimulator.com’s products. If you install this user generated content and it infringes the rules regarding user-generated content, RailSimulator.com Limited may choose to discontinue any support for that product which they may otherwise have provided.
The RailWorks EULA sets out in detail how user generated content may be used, which you can review further here: www.railsimulator.com/terms. In particular, this user generated content includes work which remains the intellectual property of RailSimulator.com Limited and which may not be rented, leased, sub-licensed, modified, adapted,copied, reproduced or redistributed without the permission of RailSimulator.com Limited."
We have 2535 guests and no members online