Tennessee Pass Problems

[Chacal]

Foliage pack is a free download on Steam.

On some of the free roams I have consist errors.

Help me doctor, sometimes I feel not well.

[buzz456]

Add kuju US rail and everything should be OK.

[Chacal]

This is the thread of imprecise questions and answers.

[craigk]

Add kuju US rail and everything should be OK. Now I have been downloading just about everything I can get my hands on for Railworks. I have no problems with the route loading, but no track is to be found. Now to add kuju US rail. Can anyone give me a clue as to where to download this? I have searched alot of sites and maybe I am overlooking the link somewhere. So any help would be very much appreciated.

Posted by a real railroader who wishes railroading was as nice as railroading in Railworks 3.

[Hawk]

There's some useful tips on asking for help in the forums in this thread.

viewtopic.php?f=39&t=5203

[buzz456]

Add kuju US rail and everything should be OK. Now I have been downloading just about everything I can get my hands on for Railworks. I have no problems with the route loading, but no track is to be found. Now to add kuju US rail. Can anyone give me a clue as to where to download this? I have searched alot of sites and maybe I am overlooking the link somewhere. So any help would be very much appreciated.

Posted by a real railroader who wishes railroading was as nice as railroading in Railworks 3.

This Route uses ScaleRoad and Rural Landscapes, which are both available in freeware and payware versions from www.3dtrains.com.

That should solve your track issues.

[slick204]

Add kuju US rail and everything should be OK. Now I have been downloading just about everything I can get my hands on for Railworks. I have no problems with the route loading, but no track is to be found. Now to add kuju US rail. Can anyone give me a clue as to where to download this? I have searched alot of sites and maybe I am overlooking the link somewhere. So any help would be very much appreciated.

Posted by a real railroader who wishes railroading was as nice as railroading in Railworks 3.

This Route uses ScaleRoad and Rural Landscapes, which are both available in freeware and payware versions from http://www.3dtrains.com.

That should solve your track issues.

It should, but it doesn't.

I know I have Scalerail and Scalerail SP installed but there's another post here that mentions Scalerail ATSF. I didn't know about that one. I'll try installing that one and see if it helps.

[Chacal]

Also reinstall ScaleRail. It worked for someone who had the same problem.

[arizonachris]

There are actually 3 free versions of Scale Rail; default, SP and ATSF. Then the payware version too. Scale Roads also has a free version and a payware version. I have them all and have track everywhere. Also make sure your detail level in the graphics screen is at 10, or you lose a lot of objects on this route.

In case you don't know, there are two settings screens, one on the RW launch screen (before you click START) and one in game settings screen. I just set them both to "HIGH" nothing custom and it works fine. This really is a nice route.

[craigk]

I want to take a moment and thank everyone who weighed in on this subject. It was the Scalerail ATSF & SP free version that did the trick. I have to say that this route is well done as to what I have seen thus far. Kudo's to the creator and all who may have had a part.

Craigk
Only 4 and a half yrs to go before I can get off the real things and get down to real simulation

[slick204]

Yep, the ATSF version worked for me.

[ArcticCatZRT]

Right now I have no signals, or switch controls(The manual throws for juntions). I also have graphic issue with the junctions that make it seem that there is muliple switchs on top of each other, which causes the juntion to look bulk to the point where you cannot tell which way the switch is set.

Here I included a image of what is missing from the route according to RW_Tools (list is after duplicates were removed)



Help would be appreciated!

[buzz456]

Right now I have no signals, or switch controls(The manual throws for juntions). I also have graphic issue with the junctions that make it seem that there is muliple switchs on top of each other, which causes the juntion to look bulk to the point where you cannot tell which way the switch is set.

Here I included a image of what is missing from the route according to RW_Tools (list is after duplicates were removed)



Help would be appreciated!

I would read all the stuff about scalerail and get it installed, then I would un-install the TP route shut down railworks completely restart, clear the cache and reinstall. See if that fixes your problem.

[jamesphh]

As to the scenarios provided. Only two loaded, the others not having a scenarioproperties.xml files. The two that loaded had no driver icon.

Is this complete or will more have scenery added?

[Chacal]

Same here. Scenarios are broke, according to RW-Tools.