Railworks America Website

by **jtousign** » Thu Aug 29, 2019 6:35 pm

Hi, I downloaded the new repaint St. Lawrence and Atlantic GP40 from de file library. All is working fine but the levers into the cab are not working, I have to use the hub. For instance I click on the wipers and they don't work but the water is wiped out over the windows visually. However I don't have that problem with the required default GP40 from G-Trax for those repaints. I'm a fan of the St-Lawrence & Atlantic among other liveries and would like to fix this issue. Any help will be appreciate. !!howdy!!

by **buzz456** » Thu Aug 29, 2019 6:46 pm

Wherever you are trying to run it do you have the default one checked also? I didn't look at the bin but these often need the default active for the dependencies. If that doesn't work I'll take a look at the bin for you.

by **jtousign** » Thu Aug 29, 2019 8:55 pm

Hi Buzz, there is just one box to check for the repaint as well as the default: ''G-Trax, Trains''. As I said, the default is working fine and only the repaint model has that problem. !**conf**!

by **Railfan722** » Thu Aug 29, 2019 9:10 pm

Is Railsimulator/US ticked in the asset selection menu? It's listed as a base requirement for the GP40. Perhaps the repaint did something screwy with the file structure.

by **jtousign** » Thu Aug 29, 2019 9:18 pm

Yes, Railsimulator box is checked also

by **jtousign** » Thu Aug 29, 2019 9:19 pm

railsimulator US I meant, sorry *!!wink!!*

by **buzz456** » Fri Aug 30, 2019 8:34 am

The bin file is messed up. The cab controls are referencing the SD40 but Samuel changed all those. I suggest you contact him about fixing the bins.

by **ET44C4** » Fri Aug 30, 2019 10:26 am

Crap. Let me look and see if I can upload a fix. This was my first time repainting the GP40, so I didn't realize (or think about) the fact that a lot in the .bin was referencing the SD40. I really apologize for the inconvenience.

*!embar*!

by **ET44C4** » Fri Aug 30, 2019 10:39 am

Fix.zip

This should fix it. Again, I'm very sorry for the inconvenience....

by **jtousign** » Fri Aug 30, 2019 2:51 pm

ET44C4 wrote:
Fix.zip

This should fix it. Again, I'm very sorry for the inconvenience....

Thanks a lot to Buzz and ET44C4, all is going well now and I enjoy this repaint of St-Lawrence & Atlantic very much. *!!thnx!!*

by **buzz456** » Fri Aug 30, 2019 3:45 pm

ET44C4 wrote:
Fix.zip

This should fix it. Again, I'm very sorry for the inconvenience....

by **jtousign** » Fri Aug 30, 2019 11:03 pm

Oups! Another problem into the cabs of the GP40s St. Lawrence & Atlantic repaints, what we see through the windows is the black color from de required GP 40 from G-Trax instead of the St.L&A colors. *!!wink!!*

by **ET44C4** » Sat Aug 31, 2019 8:00 am

Sorry, AGAIN!! I'm really messing up bad... **!!bang!!**

Let me look and get another fix uploaded.

by **ET44C4** » Sat Aug 31, 2019 8:05 am

Actually, I might have to edit the CabView.GeoPcDx for the Kuju Default SD40 to read the textures for the GP40 repaint...

by **jtousign** » Sat Aug 31, 2019 3:42 pm

Thank you for your help, if I was able to fix it by myself I would do it but It's chinese to me *!rolleyes!*

Railworks America Website

St. Lawrence and Atlantic GP40

St. Lawrence and Atlantic GP40

Re: St. Lawrence and Atlantic GP40

Re: St. Lawrence and Atlantic GP40

Re: St. Lawrence and Atlantic GP40

Re: St. Lawrence and Atlantic GP40

Re: St. Lawrence and Atlantic GP40

Re: St. Lawrence and Atlantic GP40

Re: St. Lawrence and Atlantic GP40

Re: St. Lawrence and Atlantic GP40

Re: St. Lawrence and Atlantic GP40

Re: St. Lawrence and Atlantic GP40

Re: St. Lawrence and Atlantic GP40

Re: St. Lawrence and Atlantic GP40

Re: St. Lawrence and Atlantic GP40

Re: St. Lawrence and Atlantic GP40

Who is online