mainlines mec plate c boxcar

[cgw44]

I downloaded the mainelines mec plate c boxcar but they don't show up.
I have the original plate c and also made sure I checked off the mainlines box during scenario set up but they still do not show.

Thanks for any response.

[MaineLines]

Looks like the Bogie section of this car's bin file references a BN1-50ftPlateC car which would have to be installed on your system for the MEC car to work.

[BoostedFridge]

CGW44, you would need to download the pack below to get the bogie that is referenced in the MEC repaint.

http://railworksamerica.com/index.php/download-library/rolling-stock-repaints?view=document&id=1912:fmc-plate-c-boxcars-multiple-roads&catid=19:rolling-stock-repaints


Whilst you are at it, I would strongly recommend downloading the rest of the repaint packs for this fantastic model.

http://railworksamerica.com/index.php/download-library/rolling-stock-repaints?view=document&id=1486:railbox-repaints-2&catid=19:rolling-stock-repaints

http://railworksamerica.com/index.php/download-library/rolling-stock-repaints?view=document&id=1481:fmc-plate-b-repaints&catid=19:rolling-stock-repaints

http://railworksamerica.com/index.php/download-library/rolling-stock-repaints?view=document&id=1660:fmc-50ft-plate-c-rahway-valley&catid=19:rolling-stock-repaints

http://railworksamerica.com/index.php/download-library/rolling-stock-repaints?view=document&id=1948:providence-worcester-plate-c-fmc&catid=19:rolling-stock-repaints

[cgw44]

Well I tried to download the PlateC_Pack1 file but it shows up as a word file with a .rar extension.

[ssbobz]

.rar is a compressed file like .zip

the program 7zip can open it, not sure why it says it's a word file

[cgw44]

All problems are now resolved!!

I figured out that I had to open the file with winzip and installed everything and now the mec boxcars show up along with some nice new one's.

Thanks for the help!