SOO LINE released! phase 1

Post your finished add-on release announcements here!

SOO LINE released! phase 1

Unread postby eyein12 » Tue Dec 21, 2010 8:13 am

soo-line.jpg


Available here in the RWA File Library


http://www.megaupload.com/?d=7PG9HZ4V for the missing assets some of you may be experiencing, you still need to go to golden age of rails to get the remaining free assets( i tried to reduce the hunt to 1 place)


that is a pic of the route on my computer, yours comes with default rail not scalerail, hope you like it.

use winzip or winace to open the .zip file


ATTENTION PLEASE: do not use the scenarios i created they do not work, "farmland" scenario works but they were only intended for me as i worked through the route. I plan on creating some simple scenarios for the next release. SO PLEASE MAKE YOUR OWN FOR NOW! THIS ROUTE WORKS FINE OTHERWISE

Most of the missing assets can be found on train sim and railworks america. I mentioned the 5 websites to download them from. and get my assets and you'll be in really good shape. trust me If i could distribute the free stuff I would. just read the readme and spend 20 mins searching the names of the developers and you'll find the stuff.
You do not have the required permissions to view the files attached to this post.
Last edited by eyein12 on Wed Dec 22, 2010 2:25 pm, edited 1 time in total.
Home of the NEW TIER 4 GEVO PACK, SD90/80mac PACK, BNSF SEATTLE SUBDIVISION ROUTE,UPDATES and more...

http://eyein12.blogspot.com/

https://www.youtube.com/channel/UCtWF-X ... dY7ag/feed
eyein12
 
Posts: 1258
Joined: Fri Oct 15, 2010 9:47 am
Location: Pottstown, PA USA

Re: SOO LINE released! phase 1

Unread postby thecanadianrail » Tue Dec 21, 2010 11:05 am

where did you say to donate and get the asset pack with 200+ assets?
also your scale rail is having a problem.
i have had this problem, for some reason you cannot use the standard wooden ties unless u are using the scale rail track rules. otherwise this happens where you have flat ties, your ballast is too dark, and the sides of the ballast are at wierd angles. actually scale rail works with all other default rules.
User avatar
thecanadianrail
 
Posts: 2613
Joined: Fri Oct 29, 2010 8:36 am
Location: Manitoba, Canada

Re: SOO LINE released! phase 1

Unread postby TDHenderson » Tue Dec 21, 2010 11:42 am

Details on the asset pack are in the readme file.

http://railworksamerica.com/zips/rts/i- ... -FIRST.txt

Hope this helps,
Trevor
User avatar
TDHenderson
 
Posts: 691
Joined: Wed Jul 28, 2010 10:14 am
Location: Omaha, Nebraska

Re: SOO LINE released! phase 1

Unread postby eyein12 » Tue Dec 21, 2010 12:57 pm

it does not use scalerail. it uses default track, AKA b to sb track
Home of the NEW TIER 4 GEVO PACK, SD90/80mac PACK, BNSF SEATTLE SUBDIVISION ROUTE,UPDATES and more...

http://eyein12.blogspot.com/

https://www.youtube.com/channel/UCtWF-X ... dY7ag/feed
eyein12
 
Posts: 1258
Joined: Fri Oct 15, 2010 9:47 am
Location: Pottstown, PA USA

Re: SOO LINE released! phase 1

Unread postby ex-railwayman » Tue Dec 21, 2010 7:17 pm

Hello Ian,

I downloaded the zip file as I cannot open the .ace and I installed everything on your "Read Me" list which brought me right up to date with EVERYTHING that you guys in The States have made available on this site and Trainsim, etc; however, according to my RW Tools, I'm missing a few of Toripony's bridges and some of Great Northener's PRR Bulkhead 53 stuff. Any idea where these can be obtained from please, as I assume they aren't part of this asset pack that belongs to you.

Many thanks.

ex-railwayman.
i7 10700k 3.8GHz Eight Core CPU, Gigabyte Z590 AORUS ELITE AX, 32GB RAM, nVidia RTX3060ti 8GB, WIN10 PRO 64-bit. 10TB HDDs in total.
ex-railwayman
 
Posts: 1203
Joined: Tue Jun 22, 2010 6:17 pm
Location: Nottingham, England

Re: SOO LINE released! phase 1

Unread postby buzz456 » Tue Dec 21, 2010 8:16 pm

Ian,

This is a beautiful piece of work! Just ran it for the first time and I am totally impressed. Keep up the good work. !!*ok*!!
**!!bow!!** !*YAAA*!

!*cheers*!
Buzz
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
Image
User avatar
buzz456
Site Admin
 
Posts: 20999
Joined: Sun Mar 21, 2010 8:30 am
Location: SW Florida

Re: SOO LINE released! phase 1

Unread postby thecanadianrail » Tue Dec 21, 2010 8:57 pm

well that is not the default track from B to SB the rails are scale rail but the ballast is having problems.
User avatar
thecanadianrail
 
Posts: 2613
Joined: Fri Oct 29, 2010 8:36 am
Location: Manitoba, Canada

Re: SOO LINE released! phase 1

Unread postby thecanadianrail » Wed Dec 22, 2010 11:34 am

well i just tryed out the route, not bad for how far you have done. i even haven't bought your assets and i am impresed. and you were right about the track in game, but why does the picture above show scale rail track with bad ballast?
User avatar
thecanadianrail
 
Posts: 2613
Joined: Fri Oct 29, 2010 8:36 am
Location: Manitoba, Canada

Re: SOO LINE released! phase 1

Unread postby eyein12 » Wed Dec 22, 2010 2:27 pm

thecanadianrail wrote:well i just tryed out the route, not bad for how far you have done. i even haven't bought your assets and i am impresed. and you were right about the track in game, but why does the picture above show scale rail track with bad ballast?



I had orignally started with scalerail but due to licensing restrictions i chose to use rural landscapes and scale roads and revert to default track for $ sake
Home of the NEW TIER 4 GEVO PACK, SD90/80mac PACK, BNSF SEATTLE SUBDIVISION ROUTE,UPDATES and more...

http://eyein12.blogspot.com/

https://www.youtube.com/channel/UCtWF-X ... dY7ag/feed
eyein12
 
Posts: 1258
Joined: Fri Oct 15, 2010 9:47 am
Location: Pottstown, PA USA

Re: SOO LINE released! phase 1

Unread postby buzz456 » Wed Dec 22, 2010 7:02 pm

Get the assets. They make this a whole new world. Unbelievable difference! !*YAAA*!

!*cheers*!
Buzz
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
Image
User avatar
buzz456
Site Admin
 
Posts: 20999
Joined: Sun Mar 21, 2010 8:30 am
Location: SW Florida

Re: SOO LINE released! phase 1

Unread postby BNSF650 » Wed Dec 22, 2010 11:58 pm

So how can we use Scalerail for the route?
Image
New Era of Train Simulation
User avatar
BNSF650
 
Posts: 2016
Joined: Mon May 31, 2010 10:27 pm
Location: Texas

Re: SOO LINE released! phase 1

Unread postby Bananarama » Thu Dec 23, 2010 2:09 am

Since released as a commercial project, the route is only licensed to use ScaleRoad and Rural Landscapes.
Cheers!
Marc - 3DTrains

Image
User avatar
Bananarama
 
Posts: 2749
Joined: Sat Feb 14, 2009 1:17 am
Location: Another Planet

Re: SOO LINE released! phase 1

Unread postby TDHenderson » Thu Dec 23, 2010 9:42 am

BNSF650 wrote:So how can we use Scalerail for the route?


I assume the only way is to convert it yourself to ScaleRail for your own personal use.

Hack, am I correct?

Trevor
User avatar
TDHenderson
 
Posts: 691
Joined: Wed Jul 28, 2010 10:14 am
Location: Omaha, Nebraska

Re: SOO LINE released! phase 1

Unread postby Bananarama » Thu Dec 23, 2010 2:43 pm

Unless Ian opts for a license later down the road, then yes, you are correct.
Cheers!
Marc - 3DTrains

Image
User avatar
Bananarama
 
Posts: 2749
Joined: Sat Feb 14, 2009 1:17 am
Location: Another Planet

Re: SOO LINE released! phase 1

Unread postby arizonachris » Sat Dec 25, 2010 9:46 pm

I'm confused here (not surprising for an old fart like me) I have Ian's route and the 2 asset packs, (one freeware, the other is donation ware) but what do I need from Golden Age? All of it? Right now, the route will start to load, and I get a black screen after a few minutes. Have to CTRL-ALT-DEL, then I get that oh so wonderful "SBHH" Didn't save the log file.
Ryzen 7 2700K, Asus Prime X570P, 32Gb DDR4, 2x 1Tb M.2 SSD's, RTX2060 6Gb, Occulus Rift
Win 10 Pro 64bit, keyboard/ mouse/ wheel/ pedals/ baseball bat
Security Coordinator on the Battleship Iowa
User avatar
arizonachris
 
Posts: 3955
Joined: Sun Mar 21, 2010 10:36 am
Location: Southern California

Next

Return to Freeware Add-On Releases

Who is online

Users browsing this forum: No registered users and 0 guests