Can anyone do RJ Corman in SD40-2 scheme?

[buzz456]

Doesn't Donner Pass have SD40T-2? I think so.

[CSX2057]

Yes they do

[thecanadianrail]

so after a little looking I found that R J Corman also owns a few GP38-2's and some SD40T-2's in different schemes

http://www.rrpicturearchives.net/showPi ... id=1676502
http://www.rrpicturearchives.net/showPi ... id=2103397

I will do the GP-38 as soon as I buy it. Hoping it will be in the sale if a sale starts soon.

I don't know what a SD40T-2 is. My point being is there a pack with one in it? Is it worth painting it over and above the default SD40-2 that I have completed?

Just a recap I have completed,

Default Stock SD40-2 #3478
Horseshoe Curve Route F7 #1940 and #1941 both A and B units.
GP9 Pack GP9 #9002 with a white roof and #9004 with a red roof
Donner Pass Route SW1500 in lieu of the SW2
SD75 Pack Woodchip Hopper in lieu of a Coal Hopper

I am adding a second SD40-2 by cloning the one I have painted and changing the number so any clarifying statements on this SD40T-2 need to be posted now.

the 2nd picture I posted is of the sd40t-2, its a sd40 with large air intakes at the back of the locomotive and different radiators, the donner pass addon has a sp sd40t-2 included.

[CSX2057]

Ahh that makes sense. Very nice Rj you got there!

[rizzo20]

so after a little looking I found that R J Corman also owns a few GP38-2's and some SD40T-2's in different schemes

http://www.rrpicturearchives.net/showPi ... id=1676502
http://www.rrpicturearchives.net/showPi ... id=2103397

The 8861 no longer has that paint scheme. Thats the old scheme but it has since been painted. Also the SD40T-2 is a "Tunnel Motor". I could be wrong but it was explained to me that the radiator grills are different because the engine is designed to cool itself better and is designed for heavy use in railroad tunnels.

[thecanadianrail]

so after a little looking I found that R J Corman also owns a few GP38-2's and some SD40T-2's in different schemes

http://www.rrpicturearchives.net/showPi ... id=1676502
http://www.rrpicturearchives.net/showPi ... id=2103397

The 8861 no longer has that paint scheme. Thats the old scheme but it has since been painted. Also the SD40T-2 is a "Tunnel Motor". I could be wrong but it was explained to me that the radiator grills are different because the engine is designed to cool itself better and is designed for heavy use in railroad tunnels.

that's the exact purpose of it!

[Marleyman]

So, I should do #8861 in Red and Silver with a Red roof and use the SD40T-2 from the DP Route? I just need to be sure that is what you want instead of cloning the default SD40-2 that I have completed.

[Marleyman]

That should do it for the SD40T-2.

better.JPG

[Marleyman]

A few final checks and I think I am done...

RJ Corman SD40T-2 TS2013 b.JPG

RJ Corman SD40T-2 TS2013.JPG

Much more work on this one due to the textures being 2048x which means I had to make new 'Alpha channels'

[harryadkins]

Excellent work!

[imnew]

Amazing work and thanks for sharing Marleyman

[CSX2057]

Very nice Marley!

[Marleyman]

I need this pack tested now please.

I have posted it on my site and I did delete the reskins to test the installer myself but nothing beats a fresh new install of the pack for peace of mind.

The pack is here- Marleymans RJ Corman Livery reskin pack and you will have to be registered on my site. You also require the following addons.

TS2012 for the Test Track Route
Default Stock - for the SD40-2
RSC Horseshoe Curve Route - for the F7
RSC GP9 Pack - for the GP9
RSC Donner Pass Route - for the SW1500 and the SD40T-2
RSC SD75 Pack - for the Woodchip Hopper blue

I need to know that all the reskins show up in game at the very least. I have packaged a Free Roam Scenario for the Test Track to make it quicker to check that they all show up.

If all is well I will release the pack to RWA within two weeks because I selfishly want to plug my site first.

Thanks for all the help and encouragement.
Marleyman

[CSX2057]

If I test this out, will you make a Grey & Red ATSF warbonnets for Sd40?

Edit:
I'll load the working diesels on my route, I got the SBBHH. I don't own all of them that's why.

[Marleyman]

If I test this out, will you make a Grey & Red ATSF warbonnets for Sd40?

Show me an image and I will think about that.