QD compatible

[buzz456]

What does one need to do to make a locomotive quick drive compatible? My custom choice has never worked and I have a loco I would like to make QD.

[NYWhiskey]

Maybe you need a preload folder? I don't do QD but I found this,

http://www.christrains.com/ts_faq_quickdrive.html

[jalsina]

Another way to make a locomotive appear in QD is making or editing a consist with the Custom Consist Editor in QD.

[buzz456]

Another way to make a locomotive appear in QD is making or editing a consist with the Custom Consist Editor in QD.

Custom consist editor has never worked for me ever. Never completes loading.

[jalsina]

Another way to make a locomotive appear in QD is making or editing a consist with the Custom Consist Editor in QD.

Custom consist editor has never worked for me ever. Never completes loading.

It works for me 95% of time and I use it frequently. It must be the amount of third party rolling stock you hace installed compared with me, though lately I have used lots of stock downloaded from RWA.
To work with the custom editor what I use the most is patience. I do not try to look at every wagon in the consist. I add wagons behind the consist, slowly and without trying to look at all of them.

EDIT:
This baby over winter Adriana County, is about a mile long and was made 10 minutes ago in about ten minutes:

2015-11-12_00002.jpg

It has DLC and 3rd party wagons.

[buzz456]

Mine gets to 71% and then freezes. Anyway that is off the subject. What I want to know is how to get a particular locomotive to show up in the QD choices.

[buzz456]

Maybe you need a preload folder? I don't do QD but I found this,

http://www.christrains.com/ts_faq_quickdrive.html

Worked!

[jalsina]

Mine gets to 71% and then freezes. Anyway that is off the subject. What I want to know is how to get a particular locomotive to show up in the QD choices.

It isn´t off-topic.
The moment you get a consist made with the custom editor and "you play with it" once, the loco will stay in the QD roster forever, until you delete that consist.
Take a look at the screenshot. That´s the Kansas City Southern SD70 pulling that train (not originally in the roster) in a QD scenario.

About the editor freezing at 71%: more stuff in your assets means much more time for the consist editor to load.
Start the custom editor and go to lunch. It is probable that you will find it loaded when back.
I know that custom editor is a pain in the.....

[Chacal]

Also a similar article, if the above one doesn't work for you:
http://trainsimlive.blogspot.co.uk/2015 ... s-for.html

[OpenRailer90]

Mine gets to 71% and then freezes. Anyway that is off the subject. What I want to know is how to get a particular locomotive to show up in the QD choices.

Mine only ran up to 63% and crashed. Before it worked perfectly and the QD editor functioned without problems. Clearing the blueprints did nothing.

[BoostedFridge]

The custom q/d builder seems to be quite RAM intensive. My old system (4GB RAM) would load and run it ok when only the base game was installed. As I added DLC to that install, the q/d builder got quite laggy. Eventually after expanding my DLC collectuon the q/d builder would 'stall' out during the loading process in similar fashion to OpenRailer90 and Buzz.

My current setup (16GB) will run the q/d builder, but it gets very laggy and unstable when building long trains.

My old system and current one are very comparable in hardware spec with the exception of the amount of RAM.

[buzz456]

Also a similar article, if the above one doesn't work for you:
http://trainsimlive.blogspot.co.uk/2015 ... s-for.html

That one is really good. As I said above I got it to load but there is a lot more that can be done in creating these guys from what I am reading here. Play and learn time tonight!

[_o_OOOO_oo-Kanawha]

Also a similar article, if the above one doesn't work for you:
http://trainsimlive.blogspot.co.uk/2015 ... s-for.html

That one is really good. As I said above I got it to load but there is a lot more that can be done in creating these guys from what I am reading here. Play and learn time tonight!

RW_Tools can also create consists and consist fragments. You can create locomotive lash-ups and cuts of cars in those fragments, and assemble them at will into trains of different length and composition. When you do it right, you'll get a neat and compact engine selection, with all different liveries/roadnames/compositions using the same lead engine under the same engine picture. There is a .pdf on how to do it in the RW_Tools folder.

I usually create only the most basic QD consists using the game's QD Custom consist creator.
Then I edit the created file (ConsistTemplates.bin) and multiply the number of engines or cars by copy/pasting to get the desired length of train.

Like has been pointed out before, individual car numbering, or consecutive numbering of cars in an articulated set is impossible, as is putting a load on empty cars.

[OpenRailer90]

Also a similar article, if the above one doesn't work for you:
http://trainsimlive.blogspot.co.uk/2015 ... s-for.html

That one is really good. As I said above I got it to load but there is a lot more that can be done in creating these guys from what I am reading here. Play and learn time tonight!

I should take some time to learn that....as I plan to build additional ALP-45DP and ALP-46 QuickDrive consists, which is the time era for the old NEC route as I want my consists to spawn as AI traffic on that route.

[buzz456]

It's pretty easy when you get into it. By the time I do a half dozen I'm sure I'll have it in my head.