Is there one of these out there somewhere? The model not the paint job?
caboose
First unread post • 6 posts
• Page 1 of 1
caboose
by buzz456 » Fri Dec 06, 2013 5:45 pm
You do not have the required permissions to view the files attached to this post.
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
-
buzz456 - Site Admin
- Posts: 20955
- Joined: Sun Mar 21, 2010 8:30 am
- Location: SW Florida
Re: caboose
by RAILSOHIO » Fri Dec 06, 2013 6:40 pm
I have done extensive research on the streamlined cupola caboose. I have one 90 percent done in sketchup,but that is all so far. I did measurements on two of the cabooses,one DT&I the other AA. Otherwise there has not been one done for any of the train simulators. Thia style cab has way more curved surfaces than any other cab you will encounter. Plus mine is detailed with 6 sided handrails. But the short answer is NO,at the moment.
-
RAILSOHIO - Posts: 642
- Joined: Thu Jun 23, 2011 11:35 am
- Location: Little Hocking,Ohio
Re: caboose
by buzz456 » Fri Dec 06, 2013 8:56 pm
Well get back to work on it. 
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
-
buzz456 - Site Admin
- Posts: 20955
- Joined: Sun Mar 21, 2010 8:30 am
- Location: SW Florida
Re: caboose
by RAILSOHIO » Fri Dec 06, 2013 9:07 pm
buzz456 wrote:Well get back to work on it.
So far.....
You do not have the required permissions to view the files attached to this post.
-
RAILSOHIO - Posts: 642
- Joined: Thu Jun 23, 2011 11:35 am
- Location: Little Hocking,Ohio
Re: caboose
by buzz456 » Fri Dec 06, 2013 9:15 pm
Nice!
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
-
buzz456 - Site Admin
- Posts: 20955
- Joined: Sun Mar 21, 2010 8:30 am
- Location: SW Florida
Re: caboose
by RAILSOHIO » Fri Dec 06, 2013 9:23 pm
Thanks. My intent was to do a model/mesh that could be 3d printed for N and Z scale. And of course,be imported into RW. So the original has a high number of faces. I know about the hazards of converting sketch-up to other formats to import. The second LOD would be only 1/2 or less of the primary mesh. I have many irons in the fire,so it will be awhile. I started this model 5 years ago!
-
RAILSOHIO - Posts: 642
- Joined: Thu Jun 23, 2011 11:35 am
- Location: Little Hocking,Ohio
6 posts
• Page 1 of 1
Return to Rolling-Stock Design
Who is online
Users browsing this forum: No registered users and 2 guests