Railworks America

I have followed I think all the steps to do this. I converted the markers with RW Tools. Selected my area in Redem and downloaded it. Now I put all of this into Redem to create the tiles hit create. When done I open up RW clear the cache go to the editor and select my rt only to find it flat as a pancake! I have tried to keep this breif to see if someone can help if so I will go into more detail. I'm starting to lose faith in my abilaty to follow directions. Can anyone help? Thanks

Did you move the terrain tiles into your route folder?

That may be where my problem is I about half dont understand the file system. I Have my folder Shayfan then in it I made a Terrain folder and the Redem stuff is in it.

I'm having the same problem with my tile files as Shayfan1 is. I have all the converted files, moved them into the Railworks\Content\Routes\(My Route)\Terrain folder and nothing. Am I missing a critical step here? **conf**!

Thanks.

That is the correct folder.

Do you own RWTools? If so open up one of the BIN files and make sure you have information like this inside them:

Code: Select all

<?xml version="1.0" encoding="utf-8"?>
<cRecordSet xmlns:d="http://www.kuju.com/TnT/2003/Delta" d:version="1.0" d:id="814010424">
   <Record>
      <cHeightFieldTile d:id="926472352">
         <X d:type="sInt32">1</X>
         <Y d:type="sInt32">1</Y>
         <d:blob d:size="65536">20BF8C4260358B42 A0AB894256A58842 F1898742A4968642 204086429BE98542
14B685426AB48542 FBA18542F9F28542 324C8642B5618642 0EF68542EEB38542
609A8542609A8542 628B85426F228542 7BB98442075C8442 C59E834284E18242
A8178242C8528142 F85D804270A87D42 F0947A4230517642 F0B3714279476D42
E3EC6842374B6442 2588604211795D42 FD695A42E5475542 402450423FA64A42
92BD4342E4D43C42 52B73442803E2C42 00E9234200C21D42 009B1742600F1342
150D1042CA0A0D42 DE250C42FB520B42 D0610A4210D80842 504E07426C8A0642
F7D805422F340542 75E00542EA910642 FF960742929C0942 F9570B42B02E0E42
30421142C4141442 914A164237D71842 F9551942DE721842 C28F174204A61642
E9C2154215931442 D22012428EAE0F42 50AB0C42D0970942 3D81064229480142
2B1EF841E91FEF41 42C1E7415DE9E041 A24DD941CA4AD141 0075CA418061C741


and not something like this:

Code: Select all

<?xml version="1.0" encoding="utf-8"?>
<cRecordSet xmlns:d="http://www.kuju.com/TnT/2003/Delta" d:version="1.0" d:id="814010424">
   <Record>
      <cHeightFieldTile d:id="926472352">
         <X d:type="sInt32">1</X>
         <Y d:type="sInt32">1</Y>
         <d:blob d:size="65536">20BF8C4260358B42 A0AB894256A58842 F1898742A4968642 204086429BE98542
0000000000000000 0000000000000000 0000000000000000 0000000000000000
0000000000000000 0000000000000000 0000000000000000 0000000000000000
0000000000000000 0000000000000000 0000000000000000 0000000000000000
0000000000000000 0000000000000000 0000000000000000 0000000000000000
0000000000000000 0000000000000000 0000000000000000 0000000000000000
0000000000000000 0000000000000000 0000000000000000 0000000000000000
0000000000000000 0000000000000000 0000000000000000 0000000000000000
0000000000000000 0000000000000000 0000000000000000 0000000000000000
0000000000000000 0000000000000000 0000000000000000 0000000000000000
0000000000000000 0000000000000000 0000000000000000 0000000000000000

What you are looking for is a 'blob' which is all zeros '0000000000000000'. This means that ReDem did not convert anything from the BIL, or the BIL is corrupt (most likely).

IF you see data in the 'blob' then perhaps your starting location is off in the wild (this happened to me). In which case you will need to plug in some long and lat numbers into your compass (top fly out) and jump to that location.

Well mine look just like the first example. And still no tiles. I'm about ready to give up on it. Is there a way if someone would be willing to create the terrain for me? I have checked other routes and mine seems to be setup the same and yet nothing. I want to do this just for my own personal use but I have no problem sharing with everyone.

I'm having the same problem suddenly. Is there a possibility that Railworks changed something in the last update that has effected the way it reads terrain files?