Will It Be Okay

Discuss almost anything about RailWorks.

Will It Be Okay

Unread postby UPSD70ACe » Thu Sep 12, 2013 4:58 pm

Do you think it would be okay if I upload my Surfliner Route here on RWA? I would you guys to try it out that is if I can upload the Route. Folder only here is a list of Assets from Routes I used for my Surflienr Route. Mine goes from San Diego to San Luis Obispo. I have 2 ES44's that were repainted one is the Amtrak Rail Simulator Phase III ES44 other is Amtrak ES44 Phase IV

Assets from Routes I used for my Route.
Bay Of Quinte Railway
BN Big Horn Sub
BNSF Seattle
B-SB Thomas-Bill-Otto Final
C&O Alleghany
Cajon Pass
Castle Rock
CSX Mainline
PL&E Final
Connellsville To Baltimore
Connellsville To Washington
Donner Pass
Eagle Ridge
GN Butt Sub
Horseshoe Curve
Norfolk Southern Atlanta North District
Northeast Corridor
NS Mobile Alabama
Soldier Summit
Sherman Hill
Soo Line
Tennessee Pass
Willamette Pass
3Dtrains Freeware Scale Rails Standard ATSF SP
3Dtrains Rural Landscapes Freeware

Rolling Stock I use in my Route
F40PH freeware RWA Site
Amfleets Phases III IV
Obo's Freeware F40PH Pack
Amtrak P42 Set
Amtrak Superliner Surfliner Repaints
Amtrak ES44 Repaints Phase III IV
Last edited by UPSD70ACe on Thu Sep 12, 2013 5:39 pm, edited 3 times in total.
UPSD70ACe
 
Posts: 842
Joined: Sun Dec 12, 2010 12:57 pm

Re: Will It Be Okay

Unread postby artimrj » Thu Sep 12, 2013 5:09 pm

I have everything there except the BNSF Seattle. I bet most people do. Package the route, include this list and I think you will be just fine.
Bob Artim - Generation X²
I don't have a PHD, I have a DD214... Freedom carries sacrifice
I'm crawling in the dark looking for the answer
User avatar
artimrj
 
Posts: 4721
Joined: Sun Jan 31, 2010 3:07 pm
Location: Beaver, Pennsylvania

Re: Will It Be Okay

Unread postby UPSD70ACe » Thu Sep 12, 2013 5:10 pm

HI was just thinking of uploading the Route folder itself instead. I can post it on Google drive.Or I saw on RWTools Package this Routes Assets I am not sure what that would do.Can someone tell me please what that means.I can do like I said copy paste. the Route folder upload on Google Drive.
Last edited by UPSD70ACe on Thu Sep 12, 2013 5:17 pm, edited 1 time in total.
UPSD70ACe
 
Posts: 842
Joined: Sun Dec 12, 2010 12:57 pm

Re: Will It Be Okay

Unread postby artimrj » Thu Sep 12, 2013 5:16 pm

It would be better to package it with the utility program. Or at least ZIP or RAR the folder up. If you are uncertain on how to do this I can lend you a hand. I have no idea what google drive is. Is it a place to put your downloads for other people to get? Will you give out just a link or do we have it install something to access it? If you have a way for me to get the route I will package it for you.
Bob Artim - Generation X²
I don't have a PHD, I have a DD214... Freedom carries sacrifice
I'm crawling in the dark looking for the answer
User avatar
artimrj
 
Posts: 4721
Joined: Sun Jan 31, 2010 3:07 pm
Location: Beaver, Pennsylvania

Re: Will It Be Okay

Unread postby UPSD70ACe » Thu Sep 12, 2013 5:20 pm

I have the Folder zip compressed I named it Surfliner Route.In that folder is the Route Folder and the other main folder. Just like any other RSC folder.
UPSD70ACe
 
Posts: 842
Joined: Sun Dec 12, 2010 12:57 pm

Re: Will It Be Okay

Unread postby artimrj » Thu Sep 12, 2013 5:23 pm

That will work, send me a link in a PM.
Bob Artim - Generation X²
I don't have a PHD, I have a DD214... Freedom carries sacrifice
I'm crawling in the dark looking for the answer
User avatar
artimrj
 
Posts: 4721
Joined: Sun Jan 31, 2010 3:07 pm
Location: Beaver, Pennsylvania

Re: Will It Be Okay

Unread postby UPSD70ACe » Thu Sep 12, 2013 5:56 pm

I uploaded my Route on File Dropper let me know if you want the link.Note in my Route there are some Yards that have not been added yet. I did add the Track in Hobart Yard,Just did not connect them to the Mainline Tracks yet.
UPSD70ACe
 
Posts: 842
Joined: Sun Dec 12, 2010 12:57 pm

Re: Will It Be Okay

Unread postby GSkid » Fri Sep 13, 2013 1:50 am

Dude...I'm all over this if you post it. Did you use RWdecal to get the full route right? Just curious.

As for assets from all those routes? I have 8 of those routes. Sounds like quite a challenge for me to get all of those assets. I guess some stuff will be missing. That's the problem with using such a diverse set of assets for a route. *!sad!*
EMD 2-strokes rule! My all time favorite: SD45X also love the SD40-2/SD40T-2/SD45-2/SD45T-2/DD35A/DDA40X/SD70ACe/SD80ACe

Southern Pacific RR! Bloody nose/Serif lettering - Donner Pass/Tehachapi Pass/Cajon Pass/UP Coast Line


i7-11800H // RTX 3070 // 16GB DDR4 // 2TB SSD // 16” 165Hz WQXGA 16:10 w/G-Sync // TS Classic // TSW5 // Run 8 V3
User avatar
GSkid
 
Posts: 1196
Joined: Fri Sep 07, 2012 2:17 am
Location: UP's Santa Barbara subdivision - USA

Re: Will It Be Okay

Unread postby UPSD70ACe » Fri Sep 13, 2013 8:20 am

No I just added the terrain did the best I can still in wip but tracks. Are added from San Diego to Paso Robles. Tracks in yards are not added yet in Hobart yard. The tracks have been added just did not connect em to the mainline.
UPSD70ACe
 
Posts: 842
Joined: Sun Dec 12, 2010 12:57 pm

Re: Will It Be Okay

Unread postby dejoh » Fri Sep 13, 2013 9:39 am

You mentioned the NS Mobile Alabama route is needed for your route. Is this the same route that is being beta tested by a few members of Railworks at this time? And not released yet?
Your project looks promising. Raise your hand if any of you out there have half of these routes. !*hp*!
User avatar
dejoh
 
Posts: 1477
Joined: Mon Feb 16, 2009 5:08 pm
Location: So. Chicago Heights, Il.

Re: Will It Be Okay

Unread postby UPSD70ACe » Fri Sep 13, 2013 9:45 am

Yes it is but I had the Route 1st when he sent it to me I had saved it.Added it to TS2013 I am not sure where else you can get the NS Mobile Rouet at.
UPSD70ACe
 
Posts: 842
Joined: Sun Dec 12, 2010 12:57 pm

Re: Will It Be Okay

Unread postby artimrj » Fri Sep 13, 2013 9:50 am

He gave it to ottodad to fix up. The route works if you have all the assets. There is no problems with it.
Bob Artim - Generation X²
I don't have a PHD, I have a DD214... Freedom carries sacrifice
I'm crawling in the dark looking for the answer
User avatar
artimrj
 
Posts: 4721
Joined: Sun Jan 31, 2010 3:07 pm
Location: Beaver, Pennsylvania

Re: Will It Be Okay

Unread postby dejoh » Fri Sep 13, 2013 10:02 am

Let me add that The Mobile, Ala. route is excellent. I've been testing it for a few months now. Very enjoyable for switching and long hauls.
I believe the next step is up to the author. Back to subject, looking forward to the Surfliner route from you.
User avatar
dejoh
 
Posts: 1477
Joined: Mon Feb 16, 2009 5:08 pm
Location: So. Chicago Heights, Il.

Re: Will It Be Okay

Unread postby UPSD70ACe » Fri Sep 13, 2013 10:40 am

The Route is still in wip need to fix some stuff and add yard tracks in the Route. I am getting there bare with me here okay guys 1st time on. Making Routes hope Otto can upload it soon for you all to try. !!*ok*!!
UPSD70ACe
 
Posts: 842
Joined: Sun Dec 12, 2010 12:57 pm

Re: Will It Be Okay

Unread postby UPSD70ACe » Sat Sep 14, 2013 3:52 pm

Has anyone downloaded my Route over at Train Sim yet it is available there if anyone want to try it out. :D !!*ok*!! !*salute*!
UPSD70ACe
 
Posts: 842
Joined: Sun Dec 12, 2010 12:57 pm


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 3 guests