Page 1 of 1

Montour Route Problem

Unread postPosted: Mon Oct 08, 2012 7:25 am
by Coloneltapper15
Hi Richard

I am having a problem with your great Montour route with Train Simulator 2013. The problem I am having is that it refuses to show up in the Drive by Route menu. It neither shows up with or without the Preload picture. Any help would be gratefully received.

Regards

C

Re: Montour Route Problem

Unread postPosted: Mon Oct 08, 2012 8:26 am
by wackyhuman
3rd party routes only show up in the single player scenario lists. They won't show up in the collection screen or quick drive as far as I know.

Re: Montour Route Problem

Unread postPosted: Mon Oct 08, 2012 8:59 am
by Coloneltapper15
wackyhuman wrote:3rd party routes only show up in the single player scenario lists. They won't show up in the collection screen or quick drive as far as I know.


I know! It is the Drive by Route section that it does not show in, where it should.

Re: Montour Route Problem

Unread postPosted: Mon Oct 08, 2012 10:10 am
by glenn68
Did you clear the cashe? shut down TS2013 then restart it.


Glenn

Re: Montour Route Problem

Unread postPosted: Mon Oct 08, 2012 11:07 am
by Coloneltapper15
glenn68 wrote:Did you clear the cashe? shut down TS2013 then restart it.


Glenn


Yep, done that.

I take it no one else has this problem with the Montour route?

Re: Montour Route Problem

Unread postPosted: Mon Oct 08, 2012 11:15 am
by TDHenderson
All working fine. Applied the new route update yesterday and all is good (was before too).

Trevor

Re: Montour Route Problem

Unread postPosted: Mon Oct 08, 2012 11:59 am
by Coloneltapper15
Success! I had it installed in the RW 2012 version so when I decided to do a fresh install of 2013 I downloaded the Montour V.3 I didn't have all the components from the previous version installed. Now it is fine. Thanks for the help guys.

Re: Montour Route Problem

Unread postPosted: Mon Oct 08, 2012 1:17 pm
by TDHenderson
Colonel sir, be sure to grab the 3.7 update just released.

http://railworksamerica.com/cgi-bin/RW3 ... l?file=058

Trevor

Re: Montour Route Problem

Unread postPosted: Mon Oct 08, 2012 2:33 pm
by glenn68
Let me know if any of the scnearios are broken. There was a track change made over by Salida.


Glenn

Re: Montour Route Problem

Unread postPosted: Mon Oct 08, 2012 2:44 pm
by Coloneltapper15
TDHenderson wrote:Colonel sir, be sure to grab the 3.7 update just released.

http://railworksamerica.com/cgi-bin/RW3 ... l?file=058

Trevor


I have it, thanks.

Re: Montour Route Problem

Unread postPosted: Mon Oct 08, 2012 2:45 pm
by Coloneltapper15
glenn68 wrote:Let me know if any of the scnearios are broken. There was a track change made over by Salida.


Glenn


Will do. No problems as yet.

Re: Montour Route Problem

Unread postPosted: Mon Oct 08, 2012 3:12 pm
by glenn68
Ok cool.

Re: Montour Route Problem

Unread postPosted: Mon Oct 08, 2012 7:53 pm
by Rich_S
Good to hear everything is working !!*ok*!! Also note I've uploaded picture files for the P&LE SW1500's, GP38's and Glenn's MGA GP38. Hawk posted them in both the Misc. file section and the rolling stock section. No more P&LE SW1500's that look like Ace's in the new 2013 menus !*roll-laugh*!


Regards,
Rich S.

Re: Montour Route Problem

Unread postPosted: Thu Oct 11, 2012 6:33 am
by Coloneltapper15
Rich_S wrote:Good to hear everything is working !!*ok*!! Also note I've uploaded picture files for the P&LE SW1500's, GP38's and Glenn's MGA GP38. Hawk posted them in both the Misc. file section and the rolling stock section. No more P&LE SW1500's that look like Ace's in the new 2013 menus !*roll-laugh*!


Regards,
Rich S.


Thanks, I missed those.