Strange goings on

[buzz456]

Can anyone explain to me how some details on a locomotive changes when you put it into a different route or scenario? I don't understand the connection that would cause this.

Buzz

[LoneWolfDon]

Can you elaborate a bit? What details change?

[PapaXpress]

Hi Buzz, if you are talking about the numbers on the side of your SOO F7, then it may have to do with lighting. They took on a reflective property which sounded like an alpha layer issue to me.

[buzz456]

It was the rear coupling on the "c" unit, the nc version. On one route the coupler was visible and when I went to another the passenger pilot showed up which is the one with no coupler showing until you hook up to something.

Buzz

[LoneWolfDon]

If you have an ATI graphics card, turn-off the Adaptive Anti Aliasing from your graphics-card control panel, as having that option on has been known to cause some graphical glitches with some routes, scenarios and trainsets.

[Kali]

Sounds like you may not have enough developer/package boxes checked in the scenario, and a child isn't loading somewhere - that will shuffle all the others around.

[buzz456]

Interesting comment about the graphics card since I just went to the Catalyst Control Center and it won't open. Any suggestions? Says it has a error and needs to close.
Buz

[LoneWolfDon]

Sounds like something is messed up with your graphic drivers.
In that case, you might consider un-installing your graphic-drivers then re-install.