Page 1 of 1
Cannot find Norfolk Southern coal district in scenario editor
Posted:
Mon Sep 22, 2014 7:44 pmby glenn68
Trying to swap out motive power in some scenarios with rwtools for the NS coal district but the route does not show up at all.
Please help.
Glenn
Re: Cannot find Norfolk Southern coal district in scenario editor
Posted:
Mon Sep 22, 2014 11:39 pmby plethaus
Same here. Stevens Pass does not show up, either. Using the latest version 6 of RWTools.
Re: Cannot find Norfolk Southern coal district in scenario editor
Posted:
Tue Sep 23, 2014 12:07 amby Chacal
That's because these routes are archived in .ap files. That's not new, it was the same before TS2015.
Just extract their RouteProperties.xml from the .ap file (using 7zip) and RW-Tools will see them.
If you need to find the route folder, start TS2015, Edit, select the route, then click on the "Open" button. This will open the correct folder in Windows.
Re: Cannot find Norfolk Southern coal district in scenario editor
Posted:
Tue Sep 23, 2014 8:27 amby plethaus
Doh... thanks!
Re: Cannot find Norfolk Southern coal district in scenario editor
Posted:
Tue Sep 23, 2014 3:35 pmby mikesimpson
Further to the above, although extracting the RouteProperties.xml will allow the route to be displayed, you will also need to extract the scenarios if you wish to swap rolling stock in them.
Mike
Re: Cannot find Norfolk Southern coal district in scenario editor
Posted:
Tue Sep 23, 2014 5:01 pmby glenn68
All done. 7zip works out great. Now everything works.
Thanks guys for the help! it is appreciated!
Glenn
Re: Cannot find Norfolk Southern coal district in scenario editor
Posted:
Wed Sep 24, 2014 5:41 pmby mikesimpson
Note that if you use the version of 7zip which you can download from the web, it may leave extracts from .ap files as Read Only.
If you use RW_Tools and select'Find all .ap files' and then select the .ap files you wish to unpack and use the button 'Unpack using 7zip' - this uses a different version of 7zip internally and renders all the extracted files as Read/Write which is necessary for some features of RW_Tools like swapping stock.
Mike