Existing Routes Not Listed

[harryadkins]

My Ohio Steel (Dover and Masillon Divisions) route does not show up in RW Tools. My Ohio Steel (Dover Division) route is listed however. Any help with this issue?

Harry

[Chacal]

Because it's archived in \Content\Routes\5a9ff10c-70c1-48d5-85d0-ff61b9f1ede3\MainContent.ap.
RW-Tools won't see it unless you extract RouteProperties.xml from the .ap file.

[harryadkins]

Thanks Chacal. I appreciate your help.

Harry

[buzz456]

Thanks Chacal. I appreciate your help.

Harry

All you need to extract is the xml and it'll show so you don't need to load up your hard drive with the whole thing.

[Chacal]

Oh and by the way, RW-Tools has a function for extracting all RouteProperties.xml files.

[LDWinn]

I use TS-Tools. About 10 or 12 of my routes are not showing up. I have unpacked all .ap files both through TS-Tools and by using 7-zip. I have made all files read and write, using both TS-Tools and Windows. I have unpacked all scenarios the same way. But darn it if the last 10 or so routes purchased through Steam won't show up in TS-TOOLS. Am I forgetting something? I know I'm a little tired, but I've never had this issue before and have been using RW-Tools for years and years.

Hi,

When you add new routes to TS2020, you need to run the option Check Routes and Scenarios/Index Route Properties for any new routes to appear in either the Check Routes or Edit Scenarios areas. To make routes appear faster in the program, I had to index them to gain the extra speed.

Mike


Thank you Mike. That fixed it.

Lyric