Railworks America

Would someone please be able to do some Wheeling & Lake Erie SD40-3s on the Default UP SD40-2 for me? i know they are really SD40s but im from ohio and the wheeling is my favorite railroad. I dont have the money for the portland route so i can download bobbels, so im kind of out of luck on that. Dynamic Brake only units. please :)

BrandonH wrote:Would someone please be able to do some Wheeling & Lake Erie SD40-3s on the Default UP SD40-2 for me? i know they are really SD40s but im from ohio and the wheeling is my favorite railroad. I dont have the money for the portland route so i can download bobbels, so im kind of out of luck on that. Dynamic Brake only units. please :)

We going to have pictures or do I have to go fetch them so people know what they're going to work on?

Here's some just for reference And yes 1st one is not sd40 it is gp35

This is where there at but apparently they are not the kuju sd40 because it says model by RSC and Gtrax so idk if it is RSC sd40 or the Portland sd40. http://www.trainsim.com/vbts/tslib.php?searchid=2884261&page=5

I think you are wrong grasshopper. I'll go look.

From "US_WLE_SD40-2_MZ_2"

Code: Select all

Hi RailWorks3 Fans!

This is the Wheeling & Lake Erie SD40-2 Set.

Attention , please delete the following Folders:

WaLE-01 - WaLE-05 (SD40BnPack01)
WaLE-01 - WaLE-05 (SD40CnPack01)

Important, please the Crew and Lightmod photo view.
This must be set before you the locomotive onto the tracks.
The Lightmod based on Mike Calvin's  BNSF-1 GP38-2 Light Update and works only with enabled TSX!

Your must be the Original Portland Terminal Expansion Pack from G-traX (Steam) installed.
http://store.steampowered.com/app/65215/?snr=1_5_9__13

Your must be the Original RailWorks Canadian National Add-on from RSC (Steam) installed.
http://store.steampowered.com/app/24074/?snr=1_4_4__13

or

Your must be the Original Fort Kent to Eagle Lake RailWorks Add-on from RSC (Steam) installed.
http://store.steampowered.com/app/24055/?snr=1_5_9__13


Copy the Assets Folder and paste it into Program Files (x86)\Steam\SteamApps\common\railworks Folder.


For WaLE-3016 , 3034 , 3046 , 3048 , 3049 , 3067 , 3073 , 3068 , 3102 : (hiDB Models)

Copy the sd40-2_cab.GEOPCDX file from the Program Files (x86)\Steam\SteamApps\common\railworks\Assets\G-TraX\PortlandTerminal\RailVehicles\Diesel\SD40-2\PAR Cabview Folder and
paste it into the Program Files (x86)\Steam\SteamApps\common\railworks\Assets\G-TraX\PortlandTerminal\RailVehicles\Diesel\SD40-2\all WaLE Cabview Folders.

Copy the sd40_2_PAR.GEOPCDX file from the Program Files (x86)\Steam\SteamApps\common\railworks\Assets\G-TraX\PortlandTerminal\RailVehicles\Diesel\SD40-2\PAR Engine Folder and
paste it into the Program Files (x86)\Steam\SteamApps\common\railworks\Assets\G-TraX\PortlandTerminal\RailVehicles\Diesel\SD40-2\all WaLE Engine Folders.


For WaLE-4000 , 4001 , 4003 , 4016 , 4018 , 4025 : (noDB Models)

Copy the sd40-2_CN_cab.GEOPCDX file from the Program Files (x86)\Steam\SteamApps\common\railworks\Assets\RSC\SD40CnPack01\RailVehicles\Diesel\SD40-2Cn\Default Cabview Folder and
paste it into the Program Files (x86)\Steam\SteamApps\common\railworks\Assets\RSC\SD40CnPack01\RailVehicles\Diesel\SD40-2Cn\all WaLE Cabview Folders.

Copy the sd40_2_CN.GEOPCDX file from the Program Files (x86)\Steam\SteamApps\common\railworks\Assets\RSC\SD40CnPack01\RailVehicles\Diesel\SD40-2Cn\Default Engine Folder and
paste it into the Program Files (x86)\Steam\SteamApps\common\railworks\Assets\RSC\SD40CnPack01\RailVehicles\Diesel\SD40-2Cn\all WaLE Engine Folders.


Models with ID HL:with Crew and Lightmod
Models with ID NC:no Crew and no Lightmod
 

Original Models by G-traX and RSC.
Original Light Update by Mike Calvin.
Repaints by Michael Zimmer.

Have Fun!
Regards Michael!
bobbel66

From "US_WLE_SD40-2_MZ"

Code: Select all

Hi RailWork Friends!

This is the Wheeling & Lake Erie SD40-2 Package.
Assets copy in your RailWorks Homefolder.Please copy the original GEOPCDX File from the
SD40CnPack01 : sd40_2_CN.GEOPCDX and the sd40-2_CN_cab.GEOPCDX ( Default Folder ) in all WaLE Folder (01-05). 
Please copy the original GEOPCDX File from the SD40BnPack01 : sd40_2_bn.GEOPCDX and the sd40-2_cab.GEOPCDX
in all WaLE Folder (01-05).This addon must be installed :
Fort Kent to Eagle Lake RailWorks Add-on (SD40CnPack01) :   http://store.steampowered.com/app/24055/
Railworks Burlington Northern Edition (SD40BnPack01)    :   http://store.steampowered.com/app/24060/

Statement:
SD40BnPack01 - W&LE SD40-2 with dynamic Brakes (3016 , 3034 , 3048 , 3067 , 3073)
SD40CnPack01 - W&LE SD40-2   no dynamic Brakes (4001 , 4003 , 4016 , 4018 , 4025)

Have Fun!
Regards Michael!
bobbel66

I checked them out too.

I stand corrected. I remembered wrong. These are not default locos.

I'm sure they could be converted if you wanted to mess with em. Could always ask the author.

I requested that one long ago when i first started with Rail Sim when it was first released, Unfortunately right now my current situation is im out of work, so i dont have the money to go out and purchase the CN or BN pack or even the Portland Terminal, actually come to think of it I have the CN pack, but the models are messed up with the CN SD40 anyway they put Dynamic Brake fans on the Non Dynamic Brake hatch.