Another Announcement From RSC!!!

This forum is for discussion of any DTG products in development and also WIP Reports of DTG's DLC products

Another Announcement From RSC!!!

Unread postby NS9030 » Fri Dec 07, 2012 4:45 pm

Alittle late but hey, better late than never(I hope they get the headlight correct on the ES44! !!*ok*!! )

From http://railsimulatorcom.cmail2.com/t/Vi ... #block-one

Two exciting Heritage Packs for Train Simulator will recreate Norfolk Southern’s 20 locomotives in commemorative colour schemes in honour of its 30th anniversary. The heritage locomotives represent most of the railroads that played significant roles in NS’ history, including Conrail, New York Central Railroad, Penn Central and Virginian Railway. The ES44 and SD70 will carry the special commemorative liveries and all 20 locomotives are Quick Drive compatible, making it possible to drive them on any route in Train Simulator.


I don't know about you guys but I'm probably buying this!
"CSX 376 clear Tontogany, K18519 out"
NS9030
 
Posts: 528
Joined: Mon Sep 26, 2011 7:14 pm
Location: BE 181.6 CSX Toledo Sub

Re: Another Announcement From RSC!!!

Unread postby BNSFdude » Fri Dec 07, 2012 5:16 pm

A lot of work is going into these puppies to satisfy us US fans. :) Chris has been working his butt off
Anthony Wood
Audio Engineer - Searchlight Simulations
User avatar
BNSFdude
 
Posts: 2721
Joined: Tue Nov 29, 2011 1:46 am

Re: Another Announcement From RSC!!!

Unread postby BNSF650 » Fri Dec 07, 2012 7:10 pm

Yes I hope they get everything right.
Image
New Era of Train Simulation
User avatar
BNSF650
 
Posts: 2016
Joined: Mon May 31, 2010 10:27 pm
Location: Texas

Re: Another Announcement From RSC!!!

Unread postby imnew » Fri Dec 07, 2012 7:19 pm

Our very own Xdriver has made these, not sure if he did all of them, but they are available in the file library here at RWA.
Intel Core I7-7770K, ZOTAC GTX 1080 Ti AMP
Extreme, ASUS ROG Strix Z270H, 16 GB HyperX Fury DDR4, Samsung 850 EVO 500GB, Corsair Force MP500 240GB M.2, 34" Ultra Wide Samsung Monitor
User avatar
imnew
 
Posts: 2456
Joined: Tue Aug 25, 2009 1:41 pm

Re: Another Announcement From RSC!!!

Unread postby bpetit » Fri Dec 07, 2012 11:38 pm

why would you buy it when Xdriver has most of them repainted already.

"If you really needed a diesel locomotive right away, then go ahead and order a ALCO. But if you could wait for real quality, then go for an EMD or a GE".


My Youtube Channel (Railfanning and Train Simulator 2018)
http://www.youtube.com/user/3985gtasa
User avatar
bpetit
 
Posts: 1985
Joined: Sun Sep 19, 2010 9:44 pm
Location: New Orleans, Louisiana

Re: Another Announcement From RSC!!!

Unread postby BNSFdude » Sat Dec 08, 2012 1:14 am

and because someone did some kick butt horns for these guys. *ahem*
Anthony Wood
Audio Engineer - Searchlight Simulations
User avatar
BNSFdude
 
Posts: 2721
Joined: Tue Nov 29, 2011 1:46 am

Re: Another Announcement From RSC!!!

Unread postby BNSF650 » Sat Dec 08, 2012 1:24 am

Lets hope..
Image
New Era of Train Simulation
User avatar
BNSF650
 
Posts: 2016
Joined: Mon May 31, 2010 10:27 pm
Location: Texas

Re: Another Announcement From RSC!!!

Unread postby BNSFdude » Sat Dec 08, 2012 2:06 am

Nope. Not even the same. The old one was modulated once I sent it. I'm making sure this one stays the same.
Anthony Wood
Audio Engineer - Searchlight Simulations
User avatar
BNSFdude
 
Posts: 2721
Joined: Tue Nov 29, 2011 1:46 am

Re: Another Announcement From RSC!!!

Unread postby XDriver » Sat Dec 08, 2012 2:26 am

He he. For all I know they probably used mine for templates. A least mine were free. They will probably charge money for them. Makes me wish I would have. Just kidding. *!lol!* !*salute*!
Image
User avatar
XDriver
R.I.P.
 
Posts: 812
Joined: Wed Oct 19, 2011 7:58 pm
Location: Erie, Pa.

Re: Another Announcement From RSC!!!

Unread postby NDORFN » Sat Dec 08, 2012 5:06 am

XDriver wrote:He he. For all I know they probably used mine for templates. A least mine were free. They will probably charge money for them. Makes me wish I would have. Just kidding. *!lol!* !*salute*!


But you didn't, because you are cool and RSC is not. !!*ok*!!
NDORFN
 
Posts: 1231
Joined: Mon Nov 28, 2011 8:12 pm
Location: Matamata, New Zealand

Re: Another Announcement From RSC!!!

Unread postby buzz456 » Sat Dec 08, 2012 9:34 am

NDORFN wrote:
XDriver wrote:He he. For all I know they probably used mine for templates. A least mine were free. They will probably charge money for them. Makes me wish I would have. Just kidding. *!lol!* !*salute*!


But you didn't, because you are cool and RSC is not. !!*ok*!!


Please note:
We ask that references or comparisons to other sims be minimized and kept in context with a positive attitude, or not used at all, so we can keep this experience a positive one.
We also expect members of the RS.com team, as they are professional guests, will be treated with the utmost courtesy and that any venting or outburst against members of the RS.com team or company will not be tolerated, just as we ask the same for member to member interaction.
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
Image
User avatar
buzz456
Site Admin
 
Posts: 20968
Joined: Sun Mar 21, 2010 8:30 am
Location: SW Florida

Re: Another Announcement From RSC!!!

Unread postby OldProf » Sat Dec 08, 2012 12:16 pm

BNSF650 wrote:Yes I hope they get everything right.


I might agree with you if I knew whose definition of "right" you want to use and what that definition is. !*don-know!*
Tom Pallen (Old Prof)

{Win 10 Home 64-bit; Intel Core i7 6700 @ 3.40GHz; 16.0GB Single-Channel @ 1063 MHz (15-15-15-364); 2047MB NVIDIA GeForce GTX 960}
User avatar
OldProf
 
Posts: 2743
Joined: Wed Sep 09, 2009 10:09 am

Re: Another Announcement From RSC!!!

Unread postby buzz456 » Sat Dec 08, 2012 12:18 pm

Old Prof wrote:
BNSF650 wrote:Yes I hope they get everything right.


I might agree with you if I knew whose definition of "right" you want to use and what that definition is. !*don-know!*


That's sort of like "What the meaning of the word is is." !*roll-laugh*!
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
Image
User avatar
buzz456
Site Admin
 
Posts: 20968
Joined: Sun Mar 21, 2010 8:30 am
Location: SW Florida

Re: Another Announcement From RSC!!!

Unread postby gwgardner » Sat Dec 08, 2012 12:51 pm

buzz456 wrote:
Please note:
We ask that references or comparisons to other sims be minimized and kept in context with a positive attitude, or not used at all, so we can keep this experience a positive one.
We also expect members of the RS.com team, as they are professional guests, will be treated with the utmost courtesy and that any venting or outburst against members of the RS.com team or company will not be tolerated, just as we ask the same for member to member interaction.


About time! This forum is starting to sound like the other forum, with all the complainers and nitpickers. I'd like to see the moderators get a little tough with the complainers. Except for me, of course.
gwgardner
 
Posts: 701
Joined: Tue Jan 25, 2011 2:34 pm

Re: Another Announcement From RSC!!!

Unread postby artimrj » Sat Dec 08, 2012 1:18 pm

Yeah he knows thats why he said "Except me".

Complaining is not the problem it is the way the complaining is stated. It usually turns into a complete bash of someone or something. Thats what we do not want. Someone has a problem then the next thing you know they are saying RSC is no good or ripped them off or don't care and just want our money. I like instant gratification as much as the next guy but it does not always happen.

User to user statements also tend to get out of hand. There is no need to make snide remarks to each other. All it takes is a little thought when posting. Think about what you post, if someone said it to you would you get ticked off? If so then you should not post it. I thought we were all friends here?
Bob Artim - Generation X²
I don't have a PHD, I have a DD214... Freedom carries sacrifice
I'm crawling in the dark looking for the answer
User avatar
artimrj
 
Posts: 4721
Joined: Sun Jan 31, 2010 3:07 pm
Location: Beaver, Pennsylvania

Next

Return to DTG DLC Development & WIP

Who is online

Users browsing this forum: No registered users and 2 guests