Raton Pass route

[RolandBP]

I installed the Logo patches for Raton pass and they look great {not tried the Blue and Yellow loco yet}. {Oops the Blue and Yellow Santa Fe Locos are the ones for Arizona Divide}
Many thanks to Buzz
Roland

[RolandBP]

I just wish to say thanks to Buzz for the Logo fix, the locos look so much nicer now.

Roland from a land Down Under.

[JohnM1945]

Thanks for the logo decals!

John M

[trev123]

I do not. In the System Folder, all I have is some primarynumber_X.TgPcDx files, and a softshade_long.TgPcDx file.

Is that my problem?

I don't know. Is the one in the engine file there. Here is the system folder. Put the content (Texture folder) in there and see if that fixes the problem.

System.zip

I think that DTG must have changed something in the file structure as those files in the zip file seem to no longer work for me. They use to work once upon a time. I have been following all the instruction here on where to put these files but they don't seem to work anymore.

[kris120]

Oh, I recently had to correct "System.zip" in Raton (I think it was the same you are talking about it here):

The original unpacked ( do it ! ) provided :
JL\Raton\System\Textures\

OK is:
JL\Raton\Textures\

[trev123]

That didn't work for me.

[JohnS]

That didn't work for me.

My Raton decals are in JL\Raton\RailVehicles\Diesel\Dash8-40CW\Default\Engine\Textures and JL\Raton\RailVehicles\Diesel\Dash8-40BW\Engine\Textures respectively. Dash8-40cw decal texture file is called decals.TgPcDx and the Dash8-40BW is decalsatsf.TgPcDx. They are the same as the decals in the JL\Raton\Textures folder. Bdecalsatsf.TgPcDx goes to the Dash8-40BW, just delete the "B" in the name and copy it to the above location and then Cdecals.TgPcDx is for the Dash8-40CW, just delete the "C" in the name and copy it to the above location. Hopefully that fixes Raton for you.

John
P.S. I'm in the US so I already had the decals in place.

[trev123]

No that didn't work. I only have the Bdecalsatsf.TgPcDx, not the Cdecals.TgPcDx. I use to have the logos working when the route first came out with Buzz files which you can see in this thread and also my screenshot showing the logos.

[JohnS]

No that didn't work. I only have the Bdecalsatsf.TgPcDx, not the Cdecals.TgPcDx. I use to have the logos working when the route first came out with Buzz files which you can see in this thread and also my screenshot showing the logos.

Copy it and rename it. They are exactly the same textures just different names

[trev123]

That didn't work for me.

My Raton decals are in JL\Raton\RailVehicles\Diesel\Dash8-40CW\Default\Engine\Textures and JL\Raton\RailVehicles\Diesel\Dash8-40BW\Engine\Textures respectively. Dash8-40cw decal texture file is called decals.TgPcDx and the Dash8-40BW is decalsatsf.TgPcDx. They are the same as the decals in the JL\Raton\Textures folder. Bdecalsatsf.TgPcDx goes to the Dash8-40BW, just delete the "B" in the name and copy it to the above location and then Cdecals.TgPcDx is for the Dash8-40CW, just delete the "C" in the name and copy it to the above location. Hopefully that fixes Raton for you.

John
P.S. I'm in the US so I already had the decals in place.

Those texture files were inside a system folder inside the Raton AP file which I extracted. I put them into both locos as you said but still no joy. Anyway, I have given up on this. I have written about it on Mileposts Simulation FB page suggesting that they make a branding patch for those outside the USA and upload it to something like Onedrive as I know that they would have more sales of their routes as I have heard that people won't buy the route unbranded. I don't really fancy my chances of them doing anything about it though.

[mindenjohn]

Trev
The patch for Arizona Divide by Trurail (see below) works for Raton locos as well

https://www.trurailsimulations.com/arizona-divide

I suggest you "put" this safe in case DTG do another change on the quiet.

[buzz456]

Does anyone know what What the actual path is for this line of code?

rName d:type="cDeltaString">TrainDecal.fx</ShaderName>
<TextureByName>
<e d:type="cDeltaString">..\..\..\..\..\textures\[00]bdecalsatsf</e>

[trev123]

Thanks to kris120 I have now got the logos working. I deleted Raton Pass from my computer and reinstalled it.