Railworks America

SD45-SP Pack; Daylight and Kodachrome reskin that I am working on.





Should also be limited to 3,000 HP by the time it is completed.

Nice work MM !

Daylight completed, a slight change in the colours from the previous images and all the 'wee bits' completed too.

Onto the 'Kodachrome' now.

These look great Marleyman, thank you!

and a first look at the Kodachrome

Marleyman wrote:and a first look at the Kodachrome

SD45 Kodachrome #7399 TS2014.JPG

Did this paint job come in a variety of ASA levels?

:) Just ASA 100 for outdoor use!

Kodachrome looks done now.





And a shot of the both together.



Now to work on the engine rating.

Looking at the 'sim bin' file I see a MaxPowerAtRail entry in the SD45 Engine Simulation.bin file. I think, from what I read online, that is the power rating for the loco.

It reads:
<MaxPowerAtRail d:type="sFloat32" d:alt_encoding="000000000050A940" d:precision="string">3240</MaxPowerAtRail>

I take that 3240 to be about 10% less than the rating of 3500 so I have edited the reskins 'sim.bin' to read:

<MaxPowerAtRail d:type="sFloat32" d:alt_encoding="000000000018A540" d:precision="string">2700</MaxPowerAtRail>

2700 being about 10% of the 3000bhp that was requested for this reskin.

I have no real testing to prove that this is either correct or will reduce the loco rating within TS2014, so if you have any input for m, let me know please.

Them are nice. Anychance of doing SPSF? Or SF ?

Its going to be more than 10% loss, and you will need to change the TE vs MPH chart. I'll PM you with the details and the hows and whys tonight.

MM

BNSF650 wrote:Them are nice. Anychance of doing SPSF? Or SF ?

Did any get SPSF before the merger was denied? I can do SF just by moving the logo and changing the P to F. If you have any images of the SD45 in SPDF then I will add one just because it will be easily done.

OH, I just realised the mistake on the SP then. If it was going to have SF added then the right hand side SP is in the wrong place, it needs to be at the back.