Some New Projects

[ryan9550]

Hello everybody! Now before continue I just want to say that the RS-3 project's not dead (I've put to much work in to quit on it now), I'm just taking a break from it for a little while. The following render is one of the last ones of it for a little bit:

ALCo RS-3m Newer RS Nose Render #2.jpg

Now... the purpose of this post is to show everyone the new locomotives I've been working on. The first is the GE 25 Tonner:

GE 25 Tonner Render #1.jpg

The next is the EMD NW-2:

EMD NW-2.jpg

The next is the ALCo C-415:

ALCo C-415.jpg

And last but not least is the GE E44:

GE E44.jpg

[goddrauG]

25 tonner? I can see it now. Logging railroads galore!

[RailfanKyle]

I need that RS3M

[bloodonfire3]

How about a 45/50 Tonner?

[ryan9550]

I just couldn't resist one more render of my favorite variant of the RS-3

ALCo RS-3m (Hammerhead) Render #5.jpg

[GenericZack]

cant wait to paint these

[csx42]

Hello everybody! Now before continue I just want to say that the RS-3 project's not dead (I've to much work to quit on it now), I'm just taking a break from it for a little while. The following render is one of the last ones of it for a little bit:

ALCo RS-3m Newer RS Nose Render #2.jpg

Now... the purpose of this post is to show everyone the new locomotives I've been working on. The first is the GE 25 Tonner:

GE 25 Tonner Render #1.jpg

The next is the EMD NW-2:

EMD NW-2.jpg

The next is the ALCo C-415:

ALCo C-415.jpg

And last but not least is the GE E44:

GE E44.jpg

With that 25 tonner can you make a repaint of USA 7751 an ex us army switcher now used at the pinecreek railroad, I volunteer there and can get you detailed images sound clips and the like

[ryan9550]

I've decided that whenever I start a new project, I will update this post. When I make progress on what I'm modeling, then I'll start a thread for it.

For this update I've started two new projects. The first is actually a commissioned build from GenericZack, an outdoor locomotive display:

Outdoor Covered Display 2.jpg

The next one is a pretty special type of model . How many of you can identify what this is a part of.

Mystery.jpg

Now, I can already predict it won't take long to identify what it's from. So if you know it, just post a bunch of these: or

[ryan9550]

Here's another diesel currently in the early stages of development. Can anybody guess what it is? I'm FAIR-ly certain someone will figure it out.

New Project #1.jpg

New Project #2.jpg

[PapaXpress]

HA HA HA

Hope you have better luck than I :)
http://thegradecrossing.blogspot.com/20 ... mises.html

[bloodonfire3]

Fairbanks-Morse?

[ryan9550]

Fairbanks-Morse?

Yes, specifically the H-16-44

LIRR H16_44 1503 b frbw.jpg

[ryan9550]

I just want to say that this project isn't one I just started. It's one that I started a few years ago, I just went through it and redid almost everything.

Freelance 0-4-4T Render #1.jpg

I have no clue as to what it's based on, but all I know is that it's an 0-4-4T. Here's the plan I'm using, if anyone knows what the prototype is please let me know

loco 20-3 construction2.jpg

Freelance 0-4-4T Boiler #1.jpg

Freelance 0-4-4T Frame #1.jpg

I'm actually using parts of the PRR A3. I'm using a modified frame, wheels, boiler and the cylinders. In doing that, I've had to squeeze it all into the old model.

Thanks for reading

[plethaus]

I found this about that little steam loco:

http://wordpress.wwfry.org/?page_id=182

[ryan9550]

I found this about that little steam loco:

http://wordpress.wwfry.org/?page_id=182

Thanks! I knew it had to be based on a real world locomotive. I'll refer to this engine while modeling.

Thanks again