Branford Steam RR - BSRR

[lawdoctor]

JoshuaHarkness:

As I told you yesterday I cleared cache, restarted trainsim and reinstalled both branford railroad lines. I also rode the rail line from Groton Portal to Saybrook track 1. I did notice that all train signals are in place between Groton Portal and Saybrook track 1, so the problem is restricted to the branford steam shortlines in both branford dlc's only. Can you recommend a fix or patch, should I reinstall stevens patch? I once again, want to thank you for all you have done!


Lawdoctor

[lawdoctor]

I want to thank you for your patience with me, and all of your colleagues which have shown a sincere interest in helping me. In other words, I apologize for being a pest!


lawdoctor

[sqk4477]

JoshuaHarkness:

As I told you yesterday I cleared cache, restarted trainsim and reinstalled both branford railroad lines. I also rode the rail line from Groton Portal to Saybrook track 1. I did notice that all train signals are in place between Groton Portal and Saybrook track 1, so the problem is restricted to the branford steam shortlines in both branford dlc's only. Can you recommend a fix or patch, should I reinstall stevens patch? I once again, want to thank you for all you have done!


Lawdoctor

Hi LawDoctor,

GREAT! Glad that the Groton - New London test was a success.
The issue is for the BSRR Branchline is narrowed down to StevensPass. Please reinstall StevensPass.
Please confirm that you can do a Quickdrive in the Actual Stevens Pass Route?
Please send a screenshot of the Gould Lane Crossing. Did you notice a little grey milkcan where the crossing gates and crossbucks should be?

Thanks again!

Best,
~SQK

[sqk4477]

I want to thank you for your patience with me, and all of your colleagues which have shown a sincere interest in helping me. In other words, I apologize for being a pest!


lawdoctor

Hi LawDoctor,

No appologies neccessary. It's all MinerMans' fault hehehe
jk!

~SQK

[lawdoctor]

OK, I will delete and redownload stevens pass, and will look on Gould for old milk can. I thought recycling would end the age of litterbugs! We will get back to you as soon as we look things over, thank you.

lawdoctor

[sqk4477]

Thanks LawDotcor,

Please try running a QuickDrive on the Stevens Pass DLC once your re-instal., and then test the BSRR.

Thanks again!
~SQK

[sqk4477]

I wanted to share some fantastic Photos posted by rarecommonsense over on Steam.
Thanks so much rarecommonsense!

Best,
~SQK

Old Saybrook at night


Westbrook @ night!


Westbrook Holiday Inn


Along the Main

[lawdoctor]

I have finally installed 3 of the 6 crossings on the branford line by deleting and reinstalling Stevens pass. Stony creek rd, Twin lakes road and Gould road still don't have crossings. I will try to send you images of each area on my next reply. I found the cylinder you said in the middle of twin lakes road, it appears to be a electric transformer. I will get back to you tomorrow. Thank you again for your kindness and help.

lawdoctor

[sqk4477]

I have finally installed 3 of the 6 crossings on the branford line by deleting and reinstalling Stevens pass. Stony creek rd, Twin lakes road and Gould road still don't have crossings. I will try to send you images of each area on my next reply. I found the cylinder you said in the middle of twin lakes road, it appears to be a electric transformer. I will get back to you tomorrow. Thank you again for your kindness and help.

lawdoctor

Hi LawDoctor,

That "Electrical Transformer" is a little Milk Can, that signifies that an asset has been placed that you are missing.
It still sounds like the Stevens Pass route DLC by GNTX is not installed properly. Were you able to drive a QuickDrive in the Stevens Pass route to test it is installed?

Thanks!
~SQK

[lawdoctor]

20170126160254_1.jpg

Dear, Joshua Harkness:

Enclosed are the crossings in the Branford Steam Railroad in Question, you can see they have no crossing gates nor signals.



lawdoctor

[sqk4477]

Hi LawDoctor,

This is SQK4477, Not JoshuaHarkness
Thanks for posting!

From the Screenshots I can seem multipple 'MilkCans' for assets that are not found.
Did you have any luck Quick Drive test driving the Stevens Pass Route Route Add-On:
http://store.steampowered.com/app/222617/

It really looks like you do not have the Stevens Pass Route Installed and active?

Thanks!
~SQK

[sqk4477]

Hi All,

HAPPY FRIDAY! :)
I wanted to share some more fantastic Photos posted by rarecommonsense over on Steam.
~SQK

"Taking a quickdrive (more like slowdrive) just to capture some incredibly beautiful scenery on the BSRR (SQK4477's WIP route)." -rarecommonsense

[lawdoctor]

I do have the stevens pass asset and it is installed, I don't know what is going on!


Lawdoctor

[lawdoctor]

Dear, sqk4477:

I had stevens pass installed on 12/22/16 and I have deleted and reinstalled it again along with both Branford steam railroads! I have done everything you have told me! Further, I have cleared, and verified cache numerous times and still no crossing signals on 3 of six sites on branford short line. Tell me if this is true or not, If I did not have the steven pass asset pack I would not be able to get any crossing signals or gates on any of the branford short line crossings. If it is true why do I have 3 of the 6 with gates. Is their another asset I may be missing that you can think of?

Lawdoctor

[sqk4477]

Hi LawDoctor,

You can try Running RS_Tools and do a search for missing assets:
http://www.rstools.info/downloads.html

*Use at own risk, do not hit delete on any of the options, you are just searching the BSRR Route to highlight missing assets.

Thanks!
~SQK