WIP CN SD60F Repaints

Post your FREEWARE 'Works in Progress' here!

WIP CN SD60F Repaints

Unread postby roinuj » Sun Jul 01, 2012 10:42 am

Now that eyein12 has released his great SD60F locomotive DLC, I've started to do some repaints for it.

First on the list as a modified Zebra skin. I've changed the red colour to be a more prototypical orange. I also changed the orientation of the Zebra stripping. CN Zebras had the stripes orientated so when the locos are lashed up, the stripes will face the same direction regardless of the direction of the locomotive.

Here are a couple early shots. I need to work some more on them and will also be doing a North American scheme as well as CN.ca scheme. The weathering will be pretty subdued when compared to my SD40W rust buckets because CN seems to take better care of the SD60s then they did the SD40 work horses. :D

Image

Image

Image

I'll post more progress shots as continue working on them.
I take your clean locomotives and make them dirty!

My Railworks Reskins Website
My Graphics Website - dc2graphics.com
User avatar
roinuj
 
Posts: 301
Joined: Mon Oct 31, 2011 11:37 am
Location: Ontario, Canada

Re: WIP CN SD60F Repaints

Unread postby imnew » Sun Jul 01, 2012 11:24 am

Sweet ! As always ! !!*ok*!!
Intel Core I7-7770K, ZOTAC GTX 1080 Ti AMP
Extreme, ASUS ROG Strix Z270H, 16 GB HyperX Fury DDR4, Samsung 850 EVO 500GB, Corsair Force MP500 240GB M.2, 34" Ultra Wide Samsung Monitor
User avatar
imnew
 
Posts: 2456
Joined: Tue Aug 25, 2009 1:41 pm

Re: WIP CN SD60F Repaints

Unread postby BNSF650 » Sun Jul 01, 2012 3:14 pm

Image
New Era of Train Simulation
User avatar
BNSF650
 
Posts: 2016
Joined: Mon May 31, 2010 10:27 pm
Location: Texas

Re: WIP CN SD60F Repaints

Unread postby thecanadianrail » Sun Jul 01, 2012 4:29 pm

Bc rail and cp never had any sd60f's, bcr had 8-40cm's and cp had sd40f's
User avatar
thecanadianrail
 
Posts: 2613
Joined: Fri Oct 29, 2010 8:36 am
Location: Manitoba, Canada

Re: WIP CN SD60F Repaints

Unread postby eyein12 » Sun Jul 01, 2012 4:40 pm

Can't wait amazing job!
Home of the NEW TIER 4 GEVO PACK, SD90/80mac PACK, BNSF SEATTLE SUBDIVISION ROUTE,UPDATES and more...

http://eyein12.blogspot.com/

https://www.youtube.com/channel/UCtWF-X ... dY7ag/feed
eyein12
 
Posts: 1258
Joined: Fri Oct 15, 2010 9:47 am
Location: Pottstown, PA USA

Re: WIP CN SD60F Repaints

Unread postby thecanadianrail » Sun Jul 01, 2012 7:00 pm

Sd60f's have the tri Window where sd60f's have the 4 Window. To tell a 8-40cm from the rest, the easiest way is to look at the radiators, the sd60f's have a single large vent for it on the rear where the cm has a very weird looking setup...... Take a look at some pics and after looking you will spot the differences. And the cp pic u got is real, it's just really clean with fresh paint.
User avatar
thecanadianrail
 
Posts: 2613
Joined: Fri Oct 29, 2010 8:36 am
Location: Manitoba, Canada

Re: WIP CN SD60F Repaints

Unread postby roinuj » Mon Jul 02, 2012 8:27 am

The CP "Red Barn" is based on a SD40-2.
I take your clean locomotives and make them dirty!

My Railworks Reskins Website
My Graphics Website - dc2graphics.com
User avatar
roinuj
 
Posts: 301
Joined: Mon Oct 31, 2011 11:37 am
Location: Ontario, Canada

Re: WIP CN SD60F Repaints

Unread postby roinuj » Mon Jul 02, 2012 2:31 pm

Couple additional sneak peaks of my WIP.

Image

This will be the only CN NA scheme as according to my research, 5537 is the only SD60F locomotive with the CN NA scheme.

Image

Still have some work to do to fine tune them.

Image

I have a couple glitches in the texture which I can't figure out. Will most likely leave them there as I don't think it can be fixed.

Also I have a prototypical photo of a real dirty SD60F which I'm going to paint and I'll keep secret until I release my package. *!!wink!!*
I take your clean locomotives and make them dirty!

My Railworks Reskins Website
My Graphics Website - dc2graphics.com
User avatar
roinuj
 
Posts: 301
Joined: Mon Oct 31, 2011 11:37 am
Location: Ontario, Canada

Re: WIP CN SD60F Repaints

Unread postby eyein12 » Mon Jul 02, 2012 3:27 pm

That just makes me want to finish my sd60 pack lol! what do I do? so many projects, !*hp*! **!!bow!!**
Home of the NEW TIER 4 GEVO PACK, SD90/80mac PACK, BNSF SEATTLE SUBDIVISION ROUTE,UPDATES and more...

http://eyein12.blogspot.com/

https://www.youtube.com/channel/UCtWF-X ... dY7ag/feed
eyein12
 
Posts: 1258
Joined: Fri Oct 15, 2010 9:47 am
Location: Pottstown, PA USA

Re: WIP CN SD60F Repaints

Unread postby BNSF650 » Mon Jul 02, 2012 3:35 pm

Awsome.. i hope you do
Image
New Era of Train Simulation
User avatar
BNSF650
 
Posts: 2016
Joined: Mon May 31, 2010 10:27 pm
Location: Texas

Re: WIP CN SD60F Repaints

Unread postby roinuj » Wed Jul 11, 2012 3:46 pm

Just a heads up to let everyone know I released a pacakge of SD60f repaints. Here is the link http://railworksamerica.com/forum/viewtopic.php?f=30&t=5936 to the Freeware forum.
I take your clean locomotives and make them dirty!

My Railworks Reskins Website
My Graphics Website - dc2graphics.com
User avatar
roinuj
 
Posts: 301
Joined: Mon Oct 31, 2011 11:37 am
Location: Ontario, Canada


Return to Freeware WIP

Who is online

Users browsing this forum: No registered users and 1 guest