Page 1 of 1

DTM UP EMD GP30 Physics Mod

Unread postPosted: Tue Feb 16, 2016 2:44 am
by FanRailer


This is the DTM UP EMD GP30 Physics Modification pack version 1.0

In order to utilize this freeware physics upgrade, you must have purchased the "Train Simulator: Union Pacific GP30 Loco Add-On" pack available at Steam: http://store.steampowered.com/app/277759/

This is a freeware pack; in no way is it to be used for commercial purposes. You are free, however to further modify the physics enhancements found in this pack for personal use if you so choose.

The purpose of this pack is to adjust the physics performance of the locomotive.

List of changes:
1. Modified tractive effort and braking effort curves.
2. Modified power ratings @ alternator and @ wheel.
3. Set fuel capacity to 1700 gallons.
4. Set weight to ~260,000 lbs (unit specific).
5. Removed coupler slack.
6. Adjusted rpm rate of change.
7. Adjusted locomotive load response times.
8. Removed field divert feature.

Technical specifications:
1. EMD GP30A (EMD 16-567D3; 2250 THP)
a. Starting tractive effort of 63,375 lbs (281.906 kN)
b. Continuous tractive effort of 50,000 lbs (222.4 kN) @ 9.3 mph
c. Dynamic Brake effort of 40,000 lbs (177.93 kN) @ 25 mph; fade to 0 lbs @ 0.5 mph.
d. Wheel horsepower of 2,025 hp (1,511.2 kW) @ 20 mph
e. Maximum speed of 65 mph (104.6 km/h)
f. Engine RPM range = 275 - 835
g. RPM change rate (rpm/second) = 35
h. Fuel consumption range (gph)= 3.5 - 124.9
i. Weight = 262,200 lbs (117.0536 imperial tons)
j. Fuel capacity = 1700 gallons
k. Max traction amps = 1500
l. Max brake amps = 700

2. EMD GP30B (EMD 16-567D3; 2250 THP)
a. Weight = 258,800 lbs (115.536 imperial tons)


IMPORTANT; Install Instructions

1. Locate GM GP30-UP (C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\DTM\GM GP30-UP)
2. Open DTM_UP_EMD_GP30_Physics_Mod.rar
3. Drag the file folders from the .rar in step 2 into the directory you opened in step 1.
4. The installation should be complete. Run TS2016 to check.
5. If installation is botched or does not work, to back up to original files, delete the folder from step 3.


Thank you for downloading and installing.
Enjoy =)

Download link: http://www.mediafire.com/download/zn1d3 ... cs_Mod.rar

Re: DTM UP EMD GP30 Physics Mod

Unread postPosted: Tue Feb 16, 2016 5:29 pm
by jalsina
Done!
*!!thnx!!*