New Jersey Transit NJCL ALP-45DP & Comet Cars Sound & Physics Mod V1.2

[FanRailer]

This is the DTG New Jersey Transit North Jersey Coast Line ALP-45DP & Comet Car Physics & Sound Mod Pack V1.2

In order to utilize this freeware physics & sound upgrade, you must have purchased the "Train Simulator: North Jersey Coast Line Route Add-On" available here: http://store.steampowered.com/app/325970/

This is a freeware pack; in no way is it to be used for commercial purposes. You are free, however to further modify the physics & sound enhancements found in this pack for personal use if you so choose.

THIS IS BOTH A PHYSICS AND SOUND UPGRADE PACK.

The purpose of this pack is to correct physics errors in the ALP-45DP locomotive, and introduce more accurate sounds for the DLC.

Version 1.2 includes updated horn and bell sounds from Chris Reynolds (MilwaukeeNorth418). Many thanks to him for allowing me to use his sounds free of charge for this mod.

Version 2.0 will include the signature JohnS brake fix.

General Parameter Change Log (Physics):
1. Slight tweak of TE and Dynamic Brake curves.
2. Changing the rated power in the simulation.bin file so that the scripting reduces power in the correct manner.
3. Modified coupler slack performance.
4. Increased range of ALP-45DP numbers from 4500-4515 to 4500-4534.
5. Included number.dcsv files for Comet Cars in case you were one of those early purchasers who got the incorrect .dcsv files.

General Parameter Change Log (Sounds):
1. New K5LA horn recorded directly off of an ALP-45DP unit.
2. New Comet IV door chime included.
4. Replaced default traction motor sounds and code with custom code and new traction motor sounds.

Technical specifications for ALP-45DP:

1. Bombardier ALP-45DP [diesel mode] (CAT 3612C-HD x2; 4200 THP; parasitic HEP, no load)
a. Starting tractive effort of 71,000 lbs (316 kN)
b. Continuous tractive effort of 63,407.7 lbs (282.0517 kN) @ 21.42 mph
c. Dynamic Brake effort of 34,000 lbs (150 kN) @ 21.181 mph; flat curve down to 5 mph, fade to 0 lbs @ 2 mph.
d. Wheel horsepower of 3,618 hp (2,700 kW) @ 21.42 mph
e. Maximum speed of 100 mph
f. Engine RPM range = 600 - 1800
g. RPM change rate (rpm/second) = 100
h. Fuel consumption range (gph)= 21 - 214.6
i. Weight = 284,000 lbs (128.821555 metric tons)
j. Fuel capacity = 1800 gallons
k. Max traction amps = 710
l. Max brake amps = 340

2. Bombardier ALP-45DP [electric mode] (4400 kW THP; no HEP)
a. Starting tractive effort of 71,000 lbs (316 kN)
b. Continuous tractive effort of 57,269.45 lbs (261.8182 kN) @ 38.64 mph
c. Dynamic Brake effort of 34,000 lbs (150 kN) @ 65.63 mph; flat curve down to 5 mph, fade to 0 lbs @ 2 mph.
d. Wheel horsepower of 5,896 hp (4,400 kW) @ 38.64 mph
e. Maximum speed of 125 mph
f. Weight = 284,000 lbs (128.821555 metric tons)
g. Max traction amps = 710
h. Max brake amps = 340

NOTE: There is special scripting that is included with the original locomotive that automatically reduces power from the electric mode to diesel mode once you make the mode change. You should notice this reduction of power by inspecting the ammeter while you operate. Kudos to DTG for figuring that out.


IMPORTANT; Install Instructions

1. Open the following directory: "C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\DTG\NorthJerseyCoast"
2. Open the "DTG_NJT_NJCL_ALP-45DP_And_Comet_Physics_And_Sound_Mod.rar" file
3. Drag both folders from the .rar file into the directory from step 1.
4. Physics & Sound mod installation is complete.
5. Run TS2016 to confirm.


Thank you for downloading and installing. Please contact me if there is a problem with the functionality of this mod pack.
Enjoy =)

Download here: http://www.mediafire.com/download/mfkxx ... nd_Mod.rar

New Facebook Page for these mods: http://www.facebook.com/FanRailerMODS

[OpenRailer90]

Superb work with the mod. How does the simulation read the changed power ratings? If you know how to do that you should get that working on an already overdue P32AC-DM physics mod.

[jalsina]

When you see that video and the impressive work that FanRailer has put on this mod of the ALP-45DP, it makes you want to buy the DLC, even when I am not a fan of passenger trains.
Well done.... as always

[FanRailer]

When you see that video and the impressive work that FanRailer has put on this mod of the ALP-45DP, it makes you want to buy the DLC, even when I am not a fan of passenger trains.
Well done.... as always

Thanks you guys. I may be updating this mod with a new horn sound from Chris soon.

[dr1980]

Thanks for your work.

[FanRailer]

Version 1.2 of the mod; includes new horn / interior bell sound from Chris Reynolds:

[vlysakowski]

Great stuff there!!!! It sure is nice to see those improvements as well.

[jalsina]

I acquired New Jersey route during the Holidays. So I am new to it. As a matter of fact I have purchased the route mostly to complete the required DLC for the New York Division- Bergen line. I am a fan of freight more than passengers runs.
I learned today that the route has a Bombardier specified as ALP-45DP and that the DLC named as NJT ALP-46 (which I do not have) is just a different DLC (I thought before the Bombardier loco DLC was exactly the same that the one in the route DLC).
Is the ALP-46 a pure electric (as mentioned in the DLC page) or is it a dual diesel and electric as the ALP-45DP? Does DP mean "Double Power"?

The other point is that the physics mod for the ALP-45DP "is not" yet in the RWA library. I got it from FanRailer´s site.