GTrax Berk Camera Fix
Posted: Wed Sep 28, 2011 4:50 pmHey Everyone,
I see that Rick is working on a fix (and an upgrade
) to the GTrax steam locomotives but in the mean time I can show you all how to modify the cab view in RWTools so you can get back behind the boiler where you belong.
Just go into RWTools(make sure you have the newest version) and under the File menu go to open railworks file.
The file you want to open should be under Assets>G-Trax>Trains>RailVehicles>Steam>Berkshire>Default>Cab View
The name of the file you need to modify is Berksire_CabCam.Bin
One you have the file open go to the z axis coordinates (should be right in the center of the screen when you open the file ........ I have highlighted it in the attached picture)
You will want to change it from -7.841 to -9.241
And that's it! Just save your work and you should be good to go!
I see that Rick is working on a fix (and an upgrade
) to the GTrax steam locomotives but in the mean time I can show you all how to modify the cab view in RWTools so you can get back behind the boiler where you belong.Just go into RWTools(make sure you have the newest version) and under the File menu go to open railworks file.
The file you want to open should be under Assets>G-Trax>Trains>RailVehicles>Steam>Berkshire>Default>Cab View
The name of the file you need to modify is Berksire_CabCam.Bin
One you have the file open go to the z axis coordinates (should be right in the center of the screen when you open the file ........ I have highlighted it in the attached picture)
You will want to change it from -7.841 to -9.241
And that's it! Just save your work and you should be good to go!
