Railworks America

Hi everybody! I'm on the verge to complete a GP40 Québec-Gatineau repaint based on the VRC_RWA06 GP40. Lot of works by the way and finally I'm stuck on a missing texture inside the cab (see picture) on my repaint as well as on the basic model. Any help appreciated

Another issue, the warning strobe (on the upper left side of the loco) doen't work.

jtousign wrote:Another issue, the warning strobe (on the upper left side of the loco) doen't work.

Does it work on the original VRC model?

No, there is a switch on/off into the cab but nothing happens on either position. Same thing on either the RWA GP40 or my repaint.

Here is a picture of the missing texture when clicking on the 8 key on the keyboard. However the odometer is showing up correctly in the game!**conf**!

The missing textures in your first post are the numbers for the inside of the cab.

Thanks Buzz, so could It be these numbers on the cab texture file? (see picture) Then what can I do to making them appear?

That's not them. They should be VRC\RWA-GP40-01\RailVehicles\Diesel\GP30\RWASlug02\Engine\textures\cabnumbers
Here is a copy of that file if you don't have it. If you do we have another problem.

Dear Buzz, many thanks, I had the cabnumber file into the slug folder but not in the GP40, I did a copy and paste of the file in the GP40 texture folder and that works fine!!