Railworks America

I have recently installed the fabulous GreatNortherner/Mike Calvin SD7 pack with 5308/1518/990/2715, however the horns do not sound on some of them. I have enabled Kuju>RailSimulator and the GreatNortherner>SD7-9 boxes, however the horns do not work on certain units. Demo 990/991 work fine, but 2715 does not have a horn or bell(other noises start), and 5308 and 1518 show as just couplers in drive mode, although they show in the editor at first. Does anyone have any idea of what I am doing wrong as to why the horn and bell do not work on the 2715 and why 2 other units do not load?

Thank you.

Nine times out of ten if you are just showing couplers the GeoPcDX is either missing or in the wrong place. As far as the horn/bell problem what model is this based off of so I don't have to look all over the place?

The sounds are aliased to the Kuju F7, but have custom horns and bells (RailWorks\Assets\GreatNortherner\EMD-SD7-9\RailVehicles\Engines\SD7\Horns). The model itself is a custom done SD7, installed by .RWP from RWA, supposedly utilising parts from the GN/BN/CB&Q pack previously done under the 'GreatNortherner' name. Thank you for your help.

One other update, the horns do not function on the CB&Q SD7/9s either. I have tried reinstalling the SD7 .rwps again and still nothing.

Here's a whole set of bins for the SP series. Make sure and get them in the right model folder. These should all work. Let me know.

Thank you very much. They all seem to work fine now. Every file was the same one as before name wise, I find it interesting, but all I know is they work now, so thank you.

Somehow the 'parts' geo was corrupted so I substituted the one from one of the other models and then they loaded. I have no idea how the horn and bell were supposed to work since the bin was referring to a file that didn't seem to be there.