Railworks America

I've noticed the throttle on this engine doesn't stop at notch 7. Additionally, it's very hard to move the handle out of setup when using the dynamic brake.

Could somebody who owns this engine please comment.

Rob

I don't have this issue.

buzz456 wrote:I don't have this issue.

I'm using a keyboard and the HUD. Are you able to use notch 7 with these inputs?

Yep. Just ran it. I suggest you uninstall and reinstall. I have no indication of these issues. Runs in both 7 and 8 with no problems.

Uninstall it from your steam library page by unticking it in the items window. Wait for it to say not installed then tick the box and it will download again.

I uninstalled and downloaded again, but notch 7 still doesn't work.

Any other ideas?

Rob

Do you have InputMapper mods on it?

FHRob wrote:I uninstalled and downloaded again, but notch 7 still doesn't work.

Any other ideas?

Rob

What method are you moving the throttle with? Keyboard or mouse. Also what is happening when your in notch 7? Can you get to notch 8?

Works fine for me also.

OpenRailer90 wrote:Do you have InputMapper mods on it?

I'm using the stock setup, with everything in the .ap file.

DrewG wrote:

FHRob wrote:I uninstalled and downloaded again, but notch 7 still doesn't work.

Any other ideas?

Rob

What method are you moving the throttle with? Keyboard or mouse. Also what is happening when your in notch 7? Can you get to notch 8?

I tried both keyboard and mouse. The throttle skips from 6 to 8 and 8 to 6, no matter how careful I am moving said input device. I can see the number 7, but I can't lock onto that position.

Here's some information from the Dash8_32BWH.bin file. If someone can take a look at this, would be appreciated.

<DetailedDescription d:type="cDeltaString">Power Handle</DetailedDescription>
<ApplyToConsist d:type="cDeltaString">eTrue</ApplyToConsist>
<HUDControlID d:type="sUInt32">0</HUDControlID>
<InterfaceElements>
<cControlContainerBlueprint-cInteriorIrregularNotchedLever d:id="138836">
<ElementName d:type="cDeltaString">Regulator_Intermediate</ElementName>
<DifficultyType d:type="cDeltaString">Intermediate</DifficultyType>
<PickTransformName d:type="cDeltaString"></PickTransformName>
<MovementType d:type="cDeltaString">MoveDownUp</MovementType>
<AnalogInputSensitivity d:type="sFloat32" d:alt_encoding="0000000000000000" d:precision="string">0</AnalogInputSensitivity>
<DigitalInputSensitivity d:type="sFloat32" d:alt_encoding="0000000000000000" d:precision="string">0</DigitalInputSensitivity>
<AnimationName d:type="cDeltaString"></AnimationName>
<OutputInterface d:type="cDeltaString">eCab</OutputInterface>
<RestInNotchedPosition d:type="cDeltaString">eTrue</RestInNotchedPosition>
<DisplayNotchName d:type="cDeltaString">eTrue</DisplayNotchName>
<Notch>
<cControlContainerBlueprint-cInteriorIrregularNotchedLever-cExtendedNotchData d:id="138848">
<Identifier d:type="cDeltaString">0</Identifier>
<Value d:type="sFloat32" d:alt_encoding="0000000000000000" d:precision="string">0</Value>
<LocalisedNotchName>
<Localisation-cUserLocalisedString>

The last time I drove this loco the only engine sound it had was the idling sound even at full throttle, now today when I drove it the engine sounds are all there.