MRL 50ft
MRL 50ft
by mainecentral250 » Sun Jun 12, 2016 4:28 pm
I have just downloaded the MRL 50ft box car. Ran the installer, checked the box in the fly out - it showed up in the list but when I tried to put it on the tracks - no show - no couplers - nothing at all. Am I doing something wrong??
- mainecentral250
- Posts: 63
- Joined: Fri Jul 13, 2012 7:14 pm
Re: MRL 50ft
by NStrains » Sun Jun 12, 2016 6:07 pm
Do you have the 50' plate b car that it is based off of? Doesn't sound like you do.
-
NStrains - Posts: 1367
- Joined: Sun Nov 15, 2015 1:31 pm
- Location: VA near the "B-Line"
Re: MRL 50ft
by buzz456 » Sun Jun 12, 2016 6:26 pm
NStrains wrote:Do you have the 50' plate b car that it is based off of? Doesn't sound like you do.
Sounds like that's the problem. It works fine here.
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
-
buzz456 - Site Admin
- Posts: 20914
- Joined: Sun Mar 21, 2010 8:30 am
- Location: SW Florida
Re: MRL 50ft
by ssbobz » Sun Jun 12, 2016 6:38 pm
I'm seeing nothing at all. I have many repaints of the plateB and plateC but the FEC, SOU, and this MRL do not show up.
Is there a way to tell if one of the other repaints is overwriting those three?
Is there a way to tell if one of the other repaints is overwriting those three?
- ssbobz
- Posts: 551
- Joined: Thu Feb 11, 2016 10:54 am
Re: MRL 50ft
by buzz456 » Sun Jun 12, 2016 8:02 pm
Why would anything be doing that? You need to learn about file structure and go look in the file and see what's there. This is not rocket science. Go look in MainLines\RailVehicles\Freight\Boxcars and see if the MRL one is listed there. Then look in there to see if the FMC50B.GeoPcDx is in there. If it is you need to make sure the Mainlines folder is checked and that you are looking in the right place for the car. It's with the other FMC cars.
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
-
buzz456 - Site Admin
- Posts: 20914
- Joined: Sun Mar 21, 2010 8:30 am
- Location: SW Florida
Re: MRL 50ft
by ssbobz » Sun Jun 12, 2016 8:14 pm
buzz456 wrote:Why would anything be doing that? You need to learn about file structure and go look in the file and see what's there. This is not rocket science. Go look in MainLines\RailVehicles\Freight\Boxcars and see if the MRL one is listed there. Then look in there to see if the FMC50B.GeoPcDx is in there. If it is you need to make sure the Mainlines folder is checked and that you are looking in the right place for the car. It's with the other FMC cars.
Indeed I have already looked.
It is listed, as are the other repaints, among those are Digirails, Army, MDW, pretty much all of the packs from the file library.
The Geo is inside there.
The asset box is checked and the other skins do show up when I place them in the editor or view cars in the quick drive consist editor.
MRL, SOU, and FEC are the only ones that do not.
When I try to place those three in the editor there is no "click", no model attached to the cursor, the only thing that shows up is the name of the car in the list.
You do not have the required permissions to view the files attached to this post.
- ssbobz
- Posts: 551
- Joined: Thu Feb 11, 2016 10:54 am
Re: MRL 50ft
by NStrains » Sun Jun 12, 2016 10:03 pm
After checking it out, turns out I actually have the same problem on those same 3 cars!? 
-
NStrains - Posts: 1367
- Joined: Sun Nov 15, 2015 1:31 pm
- Location: VA near the "B-Line"
Re: MRL 50ft
by buzz456 » Mon Jun 13, 2016 8:11 am
Everything is identical to what I have. The last two files being Trucktex.TgPcDx which is 44kb and TrucktexAO.TgPcDx which is 172kb.
You do not have the required permissions to view the files attached to this post.
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
-
buzz456 - Site Admin
- Posts: 20914
- Joined: Sun Mar 21, 2010 8:30 am
- Location: SW Florida
Re: MRL 50ft
by ssbobz » Mon Jun 13, 2016 9:00 am
The plateB SOU with the black arrow won't show up but the plateC at the red arrow does.
You do not have the required permissions to view the files attached to this post.
- ssbobz
- Posts: 551
- Joined: Thu Feb 11, 2016 10:54 am
Re: MRL 50ft
by buzz456 » Mon Jun 13, 2016 9:56 am
Just D/L it after I saw this. I wonder where Larry is and whether he can shed any light on this.
You do not have the required permissions to view the files attached to this post.
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
-
buzz456 - Site Admin
- Posts: 20914
- Joined: Sun Mar 21, 2010 8:30 am
- Location: SW Florida
Re: MRL 50ft
by MaineLines » Mon Jun 13, 2016 5:57 pm
I'll take a look at this. Are the offending cars Plate B or Plate C and are they auto-numbered or not.
-
MaineLines - Posts: 622
- Joined: Mon Sep 14, 2009 11:21 am
Re: MRL 50ft
by NStrains » Mon Jun 13, 2016 6:15 pm
Plate B and I think they are the auto-numbered ones.
-
NStrains - Posts: 1367
- Joined: Sun Nov 15, 2015 1:31 pm
- Location: VA near the "B-Line"
28 posts
• Page 1 of 2 • 1, 2
Return to Problems and Peculiarities
Who is online
Users browsing this forum: No registered users and 2 guests