up_8677 wrote:Yeah, the move to digital communications (even for voice) will come. However, the sheer expense and difficulty of upgrading every single locomotive means that it won't come for a while. There is a free software package for monitoring ATCS (Advanced Train Control System) which already keeps track of train locations, signal indications, etc. Also, if you know the frequency, you can hear the data stream between DPUs and the lead unit.
Some other concerns about PTC include it's ability to safely control a really large freight train. Most anyone who knows anything about railroading knows that improper air brake use can lead to runaways (running out of air) or break in twos (sudden changes to in train forces).
From reading those locomotive engineer training coursebooks I have just found on the net, I conclude that trainhandling requires quite some "fingerspitzengefuhl", i.e. is quite delicate no matter how big and powerful your loco. The head end engineer is always responsible and so should be in full control of his/her train and any locomotives in the consist.
In my layman's thinking this means only the occupied lead locomotive should talk on the PTC while all m.u. and DPU should be muted.
Will there be telemetry readouts from all units and the EOTD send directly to the dispatchers' desk and Superintendent of Motive Power Disposition and Maintenance? This isn't Formula 1 where nowadays every bolt and nut is sensored and the only random factor left is the racing driver.
Does this PTC come with a dispatcher actuated remote "emergency - dump the air" switch when two blips on his screen are about to collide? I'll bet no engineer will like that.
Nationwide standardized PTC probably needs to be legally enforced by the DoT, so one can understand the RR's opposition if they think they don't need this PTC.
It will allow for some cost savings in the end, but I don't think it will greatly improve safety as there is still so much human error and hardware failure possible. How does one detect broken rail if the RR decides to do away with track circuits in the ABS and have the signals under PTC control? Perhaps lineside signals are obsolete alltogether?
Must read up on this, as there are also ongoing studies into a unified pan-European standardized train control system. Wonder who will gets their first, the EU or the AAR?
