Railworks America

OK OK I know there are all sorts of problems with it but they will be resolved I am sure.
The route has stopped me finishing updating my rolling stock packs though!!! Only the reefers and tank cars to go!!!

ALL that snow!!!!!!!

Off to do some serious snow clearing.

Cough! cough! Splutter splutter!

All that snow goes when winter is over

I didn't get any water in my camers


First rain on the cab windows and now snow!!!!!

Hmm I am going to have to winterise my RS3s now!!!!!

ehhhhh .... WHAAAATTTHHHEEEE!!!!

OK, did you have to model that snow on? Please say there is some magic trick to enabling it on older models.

oh yea...that MP15

WHEN?! WHEN?! WHEN?!

HA!!! I will finish of the freight car sets and THEN I will do the MP15s as I have already done the Steel works version and now the SP one!!!
I will go back and put snow on the RS3 too.

The snow on the loco is a "child" part so should fit on any of my locos using the same shape.

Dick

that snow is getting pretty deep, might need some rotarys.......(hint hint)

The RW3 update certainly has brought us some nice things to look at and play with

(sitting here patiently waiting for some steam with lights so i can play in teh dark )





G

KCJones wrote:HA!!! I will finish of the freight car sets and THEN I will do the MP15s as I have already done the Steel works version and now the SP one!!!
I will go back and put snow on the RS3 too.

The snow on the loco is a "child" part so should fit on any of my locos using the same shape.

Dick

Did you notice that I've done a SP painted Russell? I added a flanger operator, a working headlight, and smoke to the chimney... I also adopted the snow and ice effects from Donner, and they work fine on the GP38 from Cornell.

Oh, BTW, do you happen to have a brakewheel as a child object? I'm wanting to update a model, and need one.

Mike you are missing the best part:

KCJones wrote:The snow on the loco is a "child" part so should fit on any of my locos using the same shape.

Perhaps this will work on the 38?

Wow ! I can just see the rotaries being called into action by mr KCJones ( hint )

I MUST get my rolling stock packs finished. Then the MP15DCs. Then I want to update the Russell, give it animated wings for instance. A rotary is in the pipe line somewhere!!! I keep looking at the plans I have. I agree the Donna Pass is a good insentive.

KCJones wrote:I MUST get my rolling stock packs finished. Then the MP15DCs. Then I want to update the Russell, give it animated wings for instance. A rotary is in the pipe line somewhere!!! I keep looking at the plans I have. I agree the Donna Pass is a good insentive.

Wheee! winged Russells! It would add to the realism for sure. I'm considering adding the snow chunks to the flanger on the Russell, it would add just a bit more.