Railworks America

Posted: **Mon Jul 25, 2011 9:48 am**

For various reasons real life caught up with me so RW had been put on the back burner. But I am (I hope) back on track again. Going down the right line!!!!1 !*YAAA*!

So here is what I have been doing.
1) Upgrading my FT set. It was one of the first I did and was in need of some TLC!!!
The nose has been re-modelled, Now there are positions for 4 running numbers. Other minor body shape improvements.

FTug01.jpg

The standard FE_buckeye_couplers have been fitted

FTug02.jpg

I have also found the SW1200 shape with the flexicoil trucks. That also needs a bit of editing before being upgraded.

Sw12ug01.jpg

Posted: **Mon Jul 25, 2011 11:18 am**

The FT looks beautiful! I'll update all of my FT downloads as soon as you make it available.

The flexicoil issue with the SW1200s is going to help. While you are working on them, could you address the floating headlight on the TR5?

Posted: **Mon Jul 25, 2011 2:41 pm**

Also perhaps put both the SW1200 stacks in the stacks child? I modelled a spark arrestor for Mike, but it doesn't fit with the front stack there.

FT nose is looking much better.

Posted: **Mon Jul 25, 2011 2:54 pm**

Yes the single stack was so that a SW8 or TR6 could be modelled.

OK I will get the FT out and then set to with the Sw1200 !!howdy!!

Posted: **Mon Aug 01, 2011 4:45 pm**

Looks good.

Railworks America

Back on the project!!!!!!

Back on the project!!!!!!

Re: Back on the project!!!!!!

Re: Back on the project!!!!!!

Re: Back on the project!!!!!!

Re: Back on the project!!!!!!