This scenario was designed for the "IIR V2" route obtained from RWA but will work on V3 as well.
__________________________________________________________________________________________________________________________________
Scenario Info:

"Gravel Order"

Approximate level of difficulty is *Medium*.
Approximate time to complete is around *46* minutes.

Scenario Briefing:
Your job is to hook your engines to the grain hoppers and bring them to the top of the mountain to the grain loader and fill them. Then you need to use the runaround track to change ends for the return trip. You next need to take the loaded hoppers to the unloader on the road construction track. When they are empty you must return the hoppers to the yard siding 1 where you picked them up (You may enter the siding from either end) and then you will park the engines on the caboose Trk & Old Engine Service track. The senerio will end when the Engines come to a complete stop.

__________________________________________________________________________________________________________________________________

Installation instructions:

Launch RailWorks. From the initial RailWorks launch window, click on the "Package Manager" tab.

Un-install any previous version of this scenario is suggested Title has been changed during rework to fit the order

To install this scenario, simply click on the "Install" button, then navigate to the "IIR_Gravel_Order.rwp" file, select it then let it install. Once the installation progress-bar has completed, the scenario should be installed.

______________________________________________________________________________________

Rolling Stock Used in this scenario:

Kuju\RailSimulatorUS\railvehicles\diesel\es44ac\def2\engine\es44_def2.bin Default Stock
Kuju\RailSimulatorUS\railvehicles\diesel\f7\default\drgw\f7a_drgw.bin Default Stock
Kuju\RailSimulatorUS\railvehicles\diesel\f7\default\drgw\f7b_drgw.bin Default Stock
Kuju\RailSimulatorUS\railvehicles\diesel\sd40-2\def2\engine\sd40_2_def2.bin Default Stock
Kuju\RailSimulatorUS\railvehicles\freight\autorackcar\default\wagon\auto_rack_car.bin Default Stock
Kuju\RailSimulatorUS\railvehicles\freight\boxcar\def2\wagon\box_car_def2.bin Default Stock
Kuju\RailSimulatorUS\railvehicles\freight\boxcar\default\wagon\box_car.bin Default Stock
Kuju\RailSimulatorUS\railvehicles\freight\coalhopper\v4\wagon\coal_hopper.bin Default Stock
Kuju\RailSimulatorUS\railvehicles\freight\doublestackcar\default\wagon\double_stack_car.bin Default Stock
Kuju\RailSimulatorUS\railvehicles\freight\refridgeratorcar\default\wagon\refrigerator_car.bin Default Stock
Kuju\RailSimulatorUS\railvehicles\passenger\chaircar\drgw\coach\chair_car_drgw.bin Default Stock

All of the above is believed to be Default for Railworks 2

__________________________________________________________________________________________________________

In addition the below Rollingstock is required:

Limestone hopper:

Kuju\RailSimulatorUS\railvehicles\freight\coalhopper\limestone\wagon\limestone_hopper.bin

and can be obtained here:

http://railworksamerica.com/FileLibrary/2010/RollingStock-April-2010.html?zoom_highlight=5+Loadable+Open+Hopper

note:

You can also substitute rollingstock you don't own with RWTools (http://www.rstools.info/).
______________________________________________________________________________________________________

Credit to all respective Owners.

Disclaimer:
~~~~~~~~~~~
1) This scenario is provided on an as-is basis. Although unlikely to happen at all, I shall not be held responsible for any damage that any part of this scenario might do to your system.

2) This scenario is provided as freeware. If you wish to redistribute this scenario, modified or unmodified, please feel welcome to do so, though this Read Me file should be included with any distribution of this scenario as well as credit to me, Robert (robbit) Meek - the Developer of this "IIR_Gravel_Order" scenario.

Under no circumstances are you allowed to charge a fee for this scenario, or parts of it!