None of the fixes work for me.
Buzz said updating, or checking when I last updated might help. How would I do this?
Does anyone have a patch that they can share?
Thanks.
SD45T-2 Coupler
First unread post • 12 posts
• Page 1 of 1
SD45T-2 Coupler
by PNWR1854 » Wed Jun 06, 2018 8:33 pm
- PNWR1854
- Posts: 525
- Joined: Sat Dec 02, 2017 7:43 pm
- Location: Pacific Northwest
Re: SD45T-2 Coupler
by trev123 » Wed Jun 06, 2018 10:42 pm
Why not add to this thread instead of starting a duplicate one on the same issue ? viewtopic.php?f=63&t=15044&start=120
Intel i5-10600K CPU, Asus TUF GAMING Z490-Plus (Wi-Fi) MB, Graphics Asus RTX 3060 TI 8GB OC TUF gaming card Windows 11 Home 64 bit, 16 GB Corsair Vengeance DDR4 ram, Viewsonic VX2728 LED 1080P FHD Monitor, Samsung 1TB SSD + other conventional drives, Corsair 750W PSU.
-
trev123 - Posts: 2312
- Joined: Mon May 19, 2014 9:40 pm
- Location: Home Of The Americas Cup
Re: SD45T-2 Coupler
by buzz456 » Thu Jun 07, 2018 9:01 am
Try this and see if it works.
You do not have the required permissions to view the files attached to this post.
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
-
buzz456 - Site Admin
- Posts: 20900
- Joined: Sun Mar 21, 2010 8:30 am
- Location: SW Florida
Re: SD45T-2 Coupler
by PNWR1854 » Thu Jun 07, 2018 9:30 am
Thanks, buzz. I'll test that out when I get home 
- PNWR1854
- Posts: 525
- Joined: Sat Dec 02, 2017 7:43 pm
- Location: Pacific Northwest
Re: SD45T-2 Coupler
by buzz456 » Thu Jun 07, 2018 9:45 pm
That's helpful.
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
-
buzz456 - Site Admin
- Posts: 20900
- Joined: Sun Mar 21, 2010 8:30 am
- Location: SW Florida
Re: SD45T-2 Coupler
by PNWR1854 » Thu Jun 07, 2018 10:04 pm
I'm sorry... I installed the fix that was uploaded in the original thread, and that made them disappear, and then none of the other fixes worked. 
- PNWR1854
- Posts: 525
- Joined: Sat Dec 02, 2017 7:43 pm
- Location: Pacific Northwest
Re: SD45T-2 Coupler
by buzz456 » Fri Jun 08, 2018 9:12 am
PNWR1854 wrote:I'm sorry... I installed the fix that was uploaded in the original thread, and that made them disappear, and then none of the other fixes worked.
Don't do that. Uninstall the unit then re-install it so you are back to the original. The put the fix I just posted in and see if that works. It should. I tested it here on the ORIGINAL locomotive and all showed up OK. Even if you don't have the GP35-WP it should show up in the asset list.
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
-
buzz456 - Site Admin
- Posts: 20900
- Joined: Sun Mar 21, 2010 8:30 am
- Location: SW Florida
Re: SD45T-2 Coupler
by PNWR1854 » Fri Jun 08, 2018 9:30 am
How do I uninstall the unit? Just delete it from the files and then it will automatically reinstall? Or do I do it through steam or what?
- PNWR1854
- Posts: 525
- Joined: Sat Dec 02, 2017 7:43 pm
- Location: Pacific Northwest
Re: SD45T-2 Coupler
by buzz456 » Fri Jun 08, 2018 10:38 am
PNWR1854 wrote:How do I uninstall the unit? Just delete it from the files and then it will automatically reinstall? Or do I do it through steam or what?
The best way is to go into your Steam library find that DLC uncheck it. Then exit Steam and then re-start it. At this point the SD45 should be gone if you look into your DTM folder. Now go back into your library and check off the SD45. Exit Steam and then re-start it. You should see a item being uploaded and when it's finished the SD45 should be back in the DTM folder. Now install the patch I posted here and see if the couplers are there. You might want to look before you do the fix and make sure they are still missing in case there has been a fix done by DTG and Steam however I think not.
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
-
buzz456 - Site Admin
- Posts: 20900
- Joined: Sun Mar 21, 2010 8:30 am
- Location: SW Florida
12 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest