NJT EMD F40PH-2CAT Mod Pack Release (NJT Mod Packs Updated)

[FanRailer]

This is the DTG New Jersey Transit EMD F40PH-2CAT & Comet Car Physics & Sound Mod Pack Version 0.5

In order to utilize this freeware physics & sound upgrade, you must have purchased the "Train Simulator: NJT F40PH-2CAT Loco Add-On" available here: http://store.steampowered.com/app/325968/

This is a freeware pack; in no way is it to be used for commercial purposes. You are free, however to further modify the physics & sound enhancements found in this pack for personal use if you so choose.

THIS *WILL* BE BOTH A PHYSICS AND SOUND UPGRADE PACK.

The purpose of this pack is to correct minor errors in the F40PH-2CAT locomotive, and will introduce more accurate sounds for the DLC in a later update.

This pack also reduces drag coefficient on the Comet cars to Amfleet levels.

General Parameter Change Log (Physics):
1. Slight tweak of TE and Dynamic Brake curves.
2. Changing the rated power.
3. Modified coupler slack performance.
4. Modified fuel capacity.
5. Modified locomotive weight
6. Lowered passenger car drag coefficient.

General Parameter Change Log (Sounds):
1. To come in V1.0 release update.

Technical specifications for F40PH-2CAT:

1. EMD F40PH-2CAT (EMD 16-645E3B; 3200 THP; separate HEP)
a. Starting tractive effort of 65,000 lbs (289.1344 kN)
b. Continuous tractive effort of 38,240 lbs (170.1 kN) @ 16.5 mph
c. Dynamic Brake effort of 35,000 lbs (177.93 kN) @ 55 mph; extended range sawtooth curve between 55 mph and 36 mph. Fade to 0 lbs @ 0.5 mph
d. Wheel horsepower of 3,000 hp (2,240 kW) @ 30 mph
e. Maximum speed of 103 mph
f. Engine RPM range = 410 - 900
g. RPM change rate (rpm/second) = 25
h. Fuel consumption range (gph)= 4 - 155
i. Weight = 275,450 lbs (122.96875 imperial tons)
j. Fuel capacity = 1800 gallons
k. Max traction amps = 1785
l. Max brake amps = 700

IMPORTANT; Install Instructions

1. Open the following directory: "C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\DTG\F40PH2Pack01"
2. Open the "DTG_NJT_EMD_F40PH-2CAT_Mod_Pack.rar" file
3. Drag both folder(s) from the .rar file into the directory from step 1.
4. Mod installation is complete.
5. Run TS2016 to confirm.

Thank you for downloading and installing. Please contact me if there is a problem with the functionality of this mod pack (http://www.facebook.com/FanRailerMODS/).
Enjoy =)

Download link: http://www.mediafire.com/download/h9ap1 ... d_Pack.rar

ALP-46 mod: http://www.youtube.com/watch?v=53RPL9UYd90
ALP-45DP mod: http://www.youtube.com/watch?v=oOh1a7FV2Hw
GP40PH-2B mod: http://www.youtube.com/watch?v=ALYKGQFoowk

Facebook Page: http://www.facebook.com/FanRailerMODS/

[OpenRailer90]

Went into the passenger view of the F40PH-2CAT Comet IV coaches, it has been updated to the accurate one seen in the ALP-46 and GP40PH-2B versions.

[jalsina]

I was looking at your video related with this F40PH-2CAT mod and observed stutters when the train seems to reload scenery along the NJ route, the way you mentioned in the Bergen thread.

[FanRailer]

Mod is now updated to v0.9. F40 sounds are updated with a new horn and bell, and air brake recordings.




Download: https://www.mediafire.com/file/h9ap192f ... k.rar/file

[FanRailer]

Version 1.0 update: improved EMD 16-645 and other locomotive sounds.

[OpenRailer90]

Glad to be of help. Sounds are as close to a real NJT -2CAT for now