MadMike SP SD7 History Horn/Load Issue

Post your problems and installation issues here!

MadMike SP SD7 History Horn/Load Issue

Unread postby PullmanCar » Thu Jul 18, 2019 2:22 pm

I have recently installed the fabulous GreatNortherner/Mike Calvin SD7 pack with 5308/1518/990/2715, however the horns do not sound on some of them. I have enabled Kuju>RailSimulator and the GreatNortherner>SD7-9 boxes, however the horns do not work on certain units. Demo 990/991 work fine, but 2715 does not have a horn or bell(other noises start), and 5308 and 1518 show as just couplers in drive mode, although they show in the editor at first. Does anyone have any idea of what I am doing wrong as to why the horn and bell do not work on the 2715 and why 2 other units do not load?

Thank you.
PullmanCar
 
Posts: 5
Joined: Sat Mar 30, 2019 1:06 pm

Re: MadMike SP SD7 History Horn/Load Issue

Unread postby buzz456 » Thu Jul 18, 2019 5:29 pm

Nine times out of ten if you are just showing couplers the GeoPcDX is either missing or in the wrong place. As far as the horn/bell problem what model is this based off of so I don't have to look all over the place?
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
Image
User avatar
buzz456
Site Admin
 
Posts: 16038
Joined: Sun Mar 21, 2010 8:30 am
Location: Sycamore, Il

Re: MadMike SP SD7 History Horn/Load Issue

Unread postby PullmanCar » Thu Jul 18, 2019 7:43 pm

The sounds are aliased to the Kuju F7, but have custom horns and bells (RailWorks\Assets\GreatNortherner\EMD-SD7-9\RailVehicles\Engines\SD7\Horns). The model itself is a custom done SD7, installed by .RWP from RWA, supposedly utilising parts from the GN/BN/CB&Q pack previously done under the 'GreatNortherner' name. Thank you for your help.
PullmanCar
 
Posts: 5
Joined: Sat Mar 30, 2019 1:06 pm

Re: MadMike SP SD7 History Horn/Load Issue

Unread postby PullmanCar » Fri Jul 19, 2019 4:57 pm

One other update, the horns do not function on the CB&Q SD7/9s either. I have tried reinstalling the SD7 .rwps again and still nothing.
PullmanCar
 
Posts: 5
Joined: Sat Mar 30, 2019 1:06 pm

Re: MadMike SP SD7 History Horn/Load Issue

Unread postby buzz456 » Fri Jul 19, 2019 5:54 pm

Here's a whole set of bins for the SP series. Make sure and get them in the right model folder. These should all work. Let me know.
SD7 bins.zip
(28.13 KiB) Downloaded 12 times
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
Image
User avatar
buzz456
Site Admin
 
Posts: 16038
Joined: Sun Mar 21, 2010 8:30 am
Location: Sycamore, Il

Re: MadMike SP SD7 History Horn/Load Issue

Unread postby PullmanCar » Sun Jul 21, 2019 5:57 am

Thank you very much. They all seem to work fine now. Every file was the same one as before name wise, I find it interesting, but all I know is they work now, so thank you.
PullmanCar
 
Posts: 5
Joined: Sat Mar 30, 2019 1:06 pm

Re: MadMike SP SD7 History Horn/Load Issue

Unread postby buzz456 » Sun Jul 21, 2019 10:56 am

Somehow the 'parts' geo was corrupted so I substituted the one from one of the other models and then they loaded. I have no idea how the horn and bell were supposed to work since the bin was referring to a file that didn't seem to be there.
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
Image
User avatar
buzz456
Site Admin
 
Posts: 16038
Joined: Sun Mar 21, 2010 8:30 am
Location: Sycamore, Il


Return to Problems and Peculiarities

Who is online

Users browsing this forum: Google [Bot] and 1 guest