Thrall 65ft Bulkhead Flats needed

Announcements and Discussion about Michael Stephans' Golden Age of Railroading Development

Thrall 65ft Bulkhead Flats needed

Unread postby OlPaint » Sat Jan 12, 2013 1:25 pm

@GreatNortherner

I am collecting a lot of scenarios for various 3rd-Party routes. One car type that seems to be missing from a good many of these scenarios is the Thrall-65-bf. I already found the BN freeware pack here in the RWA library with the default asset shapes but I need the other road name repaints that were originally bundled in the GNRy pack. Any idea when we can expect to see the GNRy pack up again on the GAoR website?

OlPaint
__________________________
Chessie...Sleep Like A Kitten

OlPaint
User avatar
OlPaint
 
Posts: 606
Joined: Thu Jun 21, 2012 7:25 am

Re: Thrall 65ft Bulkhead Flats needed

Unread postby thecanadianrail » Sat Jan 12, 2013 1:39 pm

the 65ft bulkhead flatcar that he released only came in BN, you might be thinking of the smaller bulkhead flats which are currently not available at this time on his website from what I can see?
Canadian National Railways
Courtesy and Service

Proud supporter/builder of the Montana Rail Link project
User avatar
thecanadianrail
 
Posts: 2641
Joined: Fri Oct 29, 2010 9:36 am
Location: Spruce Grove, Alberta, Canada

Re: Thrall 65ft Bulkhead Flats needed

Unread postby buzz456 » Sat Jan 12, 2013 1:44 pm

OlPaint wrote:@GreatNortherner

I am collecting a lot of scenarios for various 3rd-Party routes. One car type that seems to be missing from a good many of these scenarios is the Thrall-65-bf. I already found the BN freeware pack here in the RWA library with the default asset shapes but I need the other road name repaints that were originally bundled in the GNRy pack. Any idea when we can expect to see the GNRy pack up again on the GAoR website?

OlPaint


Do you have RW Tools?
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
Image
User avatar
buzz456
Site Admin
 
Posts: 13962
Joined: Sun Mar 21, 2010 9:30 am
Location: Sycamore, Il

Re: Thrall 65ft Bulkhead Flats needed

Unread postby NDORFN » Sat Jan 12, 2013 4:01 pm

I've got them. Dunno if I'm allowed to share though.
NDORFN
 
Posts: 1250
Joined: Mon Nov 28, 2011 9:12 pm
Location: Matamata, New Zealand

Re: Thrall 65ft Bulkhead Flats needed

Unread postby OlPaint » Sun Jan 13, 2013 9:36 am

@Buzz

I have RW_Tools and have successfully changed out the Thrall Bulkhead Flats for the BN roadname ones. At least I can run the scenarios now after the swap out.

OlPaint
__________________________
Chessie...Sleep Like A Kitten

OlPaint
User avatar
OlPaint
 
Posts: 606
Joined: Thu Jun 21, 2012 7:25 am

Re: Thrall 65ft Bulkhead Flats needed

Unread postby GreatNortherner » Sun Jan 13, 2013 9:48 am

Hi,

The BN Thrall bulkhead flat is the only version of this model that I ever did. (I think.) There is similar car as part of the BCOL rolling stock on Jonathan Lewis's Fraser & Cariboo line, but I doubt that this the one that is needed.

Apart from that one I also did the older GSC bulkhead flats, but those are shorter (53'). They'll return to my website shortly.

Michael
Golden Age Rails: Website + Blog
Virtual New Haven: Website + Blog
GreatNortherner
 
Posts: 1127
Joined: Sun Feb 15, 2009 12:19 pm
Location: Czech Republic and Germany

Re: Thrall 65ft Bulkhead Flats needed

Unread postby buzz456 » Sun Jan 13, 2013 10:27 am

GreatNortherner wrote:Hi,

The BN Thrall bulkhead flat is the only version of this model that I ever did. (I think.) There is similar car as part of the BCOL rolling stock on Jonathan Lewis's Fraser & Cariboo line, but I doubt that this the one that is needed.

Apart from that one I also did the older GSC bulkhead flats, but those are shorter (53'). They'll return to my website shortly.

Michael


Aren't these 65 footers?
http://golden-age-rails.com/down3/gscfl ... lkhead.pdf
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
Image
User avatar
buzz456
Site Admin
 
Posts: 13962
Joined: Sun Mar 21, 2010 9:30 am
Location: Sycamore, Il

Re: Thrall 65ft Bulkhead Flats needed

Unread postby ex-railwayman » Sun Jan 13, 2013 10:51 am

Is this the same one, or, something else ??

http://www.elvastower.com/forums/index. ... latcar-bn/

Cheerz. ex-railwayman.
i5 4690 3.5 GHz Quad Core CPU, Gigabyte Z97-HD3, 16GB RAM, nVidia GTX1060 6GB, WIN 7 PRO 64-bit.
ex-railwayman
 
Posts: 1027
Joined: Tue Jun 22, 2010 7:17 pm
Location: Nottingham, England

Re: Thrall 65ft Bulkhead Flats needed

Unread postby buzz456 » Sun Jan 13, 2013 11:27 am

That one is the freeware one. The one I was referring to I believe was (is) payware.
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
Image
User avatar
buzz456
Site Admin
 
Posts: 13962
Joined: Sun Mar 21, 2010 9:30 am
Location: Sycamore, Il

Re: Thrall 65ft Bulkhead Flats needed

Unread postby OldProf » Sun Jan 13, 2013 12:05 pm

Michael,

How soon can we expect all of your rolling stocks to be available again? I just found some interesting looking scenarios for IIR, but they require some of your creations that aren't currently available. Sure, I could use RW_Tools to make swaps, but I'd prefer the variety of your products.
Tom Pallen (Old Prof)

{Win 10 Home 64-bit; Intel Core i7 6700 @ 3.40GHz; 16.0GB Single-Channel @ 1063 MHz (15-15-15-364); 2047MB NVIDIA GeForce GTX 960}
User avatar
OldProf
 
Posts: 2665
Joined: Wed Sep 09, 2009 11:09 am


Return to Golden Age of Railroading

Who is online

Users browsing this forum: No registered users and 2 guests