Page 1 of 1

Thrall 65ft Bulkhead Flats needed

Unread postPosted: Sat Jan 12, 2013 12:25 pm
by OlPaint
@GreatNortherner

I am collecting a lot of scenarios for various 3rd-Party routes. One car type that seems to be missing from a good many of these scenarios is the Thrall-65-bf. I already found the BN freeware pack here in the RWA library with the default asset shapes but I need the other road name repaints that were originally bundled in the GNRy pack. Any idea when we can expect to see the GNRy pack up again on the GAoR website?

OlPaint

Re: Thrall 65ft Bulkhead Flats needed

Unread postPosted: Sat Jan 12, 2013 12:39 pm
by thecanadianrail
the 65ft bulkhead flatcar that he released only came in BN, you might be thinking of the smaller bulkhead flats which are currently not available at this time on his website from what I can see?

Re: Thrall 65ft Bulkhead Flats needed

Unread postPosted: Sat Jan 12, 2013 12:44 pm
by buzz456
OlPaint wrote:@GreatNortherner

I am collecting a lot of scenarios for various 3rd-Party routes. One car type that seems to be missing from a good many of these scenarios is the Thrall-65-bf. I already found the BN freeware pack here in the RWA library with the default asset shapes but I need the other road name repaints that were originally bundled in the GNRy pack. Any idea when we can expect to see the GNRy pack up again on the GAoR website?

OlPaint


Do you have RW Tools?

Re: Thrall 65ft Bulkhead Flats needed

Unread postPosted: Sat Jan 12, 2013 3:01 pm
by NDORFN
I've got them. Dunno if I'm allowed to share though.

Re: Thrall 65ft Bulkhead Flats needed

Unread postPosted: Sun Jan 13, 2013 8:36 am
by OlPaint
@Buzz

I have RW_Tools and have successfully changed out the Thrall Bulkhead Flats for the BN roadname ones. At least I can run the scenarios now after the swap out.

OlPaint

Re: Thrall 65ft Bulkhead Flats needed

Unread postPosted: Sun Jan 13, 2013 8:48 am
by GreatNortherner
Hi,

The BN Thrall bulkhead flat is the only version of this model that I ever did. (I think.) There is similar car as part of the BCOL rolling stock on Jonathan Lewis's Fraser & Cariboo line, but I doubt that this the one that is needed.

Apart from that one I also did the older GSC bulkhead flats, but those are shorter (53'). They'll return to my website shortly.

Michael

Re: Thrall 65ft Bulkhead Flats needed

Unread postPosted: Sun Jan 13, 2013 9:27 am
by buzz456
GreatNortherner wrote:Hi,

The BN Thrall bulkhead flat is the only version of this model that I ever did. (I think.) There is similar car as part of the BCOL rolling stock on Jonathan Lewis's Fraser & Cariboo line, but I doubt that this the one that is needed.

Apart from that one I also did the older GSC bulkhead flats, but those are shorter (53'). They'll return to my website shortly.

Michael


Aren't these 65 footers?
http://golden-age-rails.com/down3/gscfl ... lkhead.pdf

Re: Thrall 65ft Bulkhead Flats needed

Unread postPosted: Sun Jan 13, 2013 9:51 am
by ex-railwayman
Is this the same one, or, something else ??

http://www.elvastower.com/forums/index. ... latcar-bn/

Cheerz. ex-railwayman.

Re: Thrall 65ft Bulkhead Flats needed

Unread postPosted: Sun Jan 13, 2013 10:27 am
by buzz456
That one is the freeware one. The one I was referring to I believe was (is) payware.

Re: Thrall 65ft Bulkhead Flats needed

Unread postPosted: Sun Jan 13, 2013 11:05 am
by OldProf
Michael,

How soon can we expect all of your rolling stocks to be available again? I just found some interesting looking scenarios for IIR, but they require some of your creations that aren't currently available. Sure, I could use RW_Tools to make swaps, but I'd prefer the variety of your products.